EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: mmx01 on October 29, 2020, 10:46:14 pm
-
Hello All,
I am working on a project which requires more than 64 LA channels. I have good old TLA714 with 7N3 (102 channels max) but never needed more than 4*P6418 pods. Buying two additional ones just for one project seems an overkill so I am looking to build my own.
Done some measurements and it looks like these are only having 20kOhm resistors on data lines. Is there anything else there? It shows some capacitance in pFs perhaps parasitic but would be strange to see decoupling capacitors on data lines to ground in an LA application.
Matching cable length etc. won't be an issue and since they use DIN 41651 sockets easy to plug-in.
Regards,
Mariusz