Products > Test Equipment

Tektronix THS7xxx Scope Hack/Teardown/Discussion - FW 1.16 found

<< < (73/95) > >>

mrprecision:
I have added some comments to the YouTube video description...

mrprecision:
If someone needs a Inverter with new CCFL for a replacement, I sell one at ebay:
eBay auction: #334114408686

1audio:
Thanks for the link to your source for the LED strips. It explains one of the mysteries. I'm using LED strips targeted for larger screens. They have no current limiting and need an external part for that. I tried witrhout and all was fine until I plugged in the charger which fried the strip. The supply goes from 5V to 12V when the charger is plugged in. I did get it all sorted out.  I'll provide some pictures of my efforts shortly.

mrprecision:
Yes the voltage for the backlight is 5V if no external power supply is connected, otherwise 12V.

PIC18F2550:

--- Quote from: mrprecision on May 18, 2021, 06:47:05 pm ---Thanks for the feedback, so you are happy with my tool, or do you have ideas for improvements?

--- End quote ---

hello mr precision, if you can add this option to read all mesured ?, i need this option because i using this oscilloscope for analyze frame of Protocol I2C/SPI/RS232/CANbus/JTAG please see the Picture canbus message of edc16c34 to my pic18f4580 this Picture is no full in ".bmp" files ,and see picture 2 of I2Cbus it full

thank to you for this soft and sorry for my bad enlish







Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod