EEVblog® Electronics Community Forum
Products => Test Equipment => Topic started by: Kosmic on June 15, 2026, 03:07:15 am
-
I built a new capture software for the Tektronix 11801 and CSA803. Initially I wanted mainly to extract the high rez data from the command "DISP? DATA" but eventually got carried away and added all the capture mode I could find ::)
Please note this was only tested on a CSA803 so if someone could test it out on a 11801 that would be great.
Some info here: https://github.com/etiennechenard/Tek11801Capture/blob/main/README.md (https://github.com/etiennechenard/Tek11801Capture/blob/main/README.md)
Download here: https://github.com/etiennechenard/Tek11801Capture/releases (https://github.com/etiennechenard/Tek11801Capture/releases)
(https://www.eevblog.com/forum/testgear/tektronix-11801-csa803-capture-software/?action=dlattach;attach=2841086;image)
(https://www.eevblog.com/forum/testgear/tektronix-11801-csa803-capture-software/?action=dlattach;attach=2841090;image)
-
I have an 11801 and I think I used John Miles' software to grab plots. Which Visa did you use and what adapter?
Look good!
Jerry
-
I have an 11801 and I think I used John Miles' software to grab plots. Which Visa did you use and what adapter?
Look good!
Jerry
I use a Keysight 82357B adapter with Keysight IO Libraries Suite 2026 (come with the VISA driver). But in theory should also work with any visa32.dll/visa64.dll (ex NI-VISA).