Author Topic: Tektronix New 3/4-Series Scope (June 4th!)  (Read 27517 times)

0 Members and 1 Guest are viewing this topic.

Offline james_s

  • Super Contributor
  • ***
  • Posts: 21611
  • Country: us
Re: Tektronix New Scope June 4th!
« Reply #75 on: May 14, 2019, 06:06:33 am »
I don't see anything interesting here, it's very rare that I need to use all four channels on my scope, I've never needed more than that on a scope. Clearly I'm not the market this is aimed at though, a lower cost iteration of the older TDS3000 with some modern features like protocol decoding would be a lot more appealing. I like the compact form factor of those.
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New Scope June 4th!
« Reply #76 on: May 14, 2019, 08:54:19 am »
So guessing from the nomenclature, the scopes are bandwidth software upgradeable. Will keep some folks on this forum busy  >:D

The no doubt high-ish base price will keep a majority of potential hackers away
Brick a $400 Rigol and it's not a huge loss. Brick a $3k scope and it's a sad day
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 28377
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Tektronix New Scope June 4th!
« Reply #77 on: May 14, 2019, 09:01:09 am »
So guessing from the nomenclature, the scopes are bandwidth software upgradeable. Will keep some folks on this forum busy  >:D

The no doubt high-ish base price will keep a majority of potential hackers away
Brick a $400 Rigol and it's not a huge loss. Brick a $3k scope and it's a sad day
But the possible gains...............

Maybe you missed this, playing with a $ 3.5k scope:
https://www.eevblog.com/forum/testgear/at-last-siglent_s-sds5054x-touchscreen/msg2376438/#msg2376438
Avid Rabid Hobbyist
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 3221
  • Country: pt
Re: Tektronix New Scope June 4th!
« Reply #78 on: May 14, 2019, 11:21:05 am »
But the possible gains...............

Maybe you missed this, playing with a $ 3.5k scope:
https://www.eevblog.com/forum/testgear/at-last-siglent_s-sds5054x-touchscreen/msg2376438/#msg2376438

Yep, "no pain, no gain".

And the playing was done using a "real" Siglent SDS5104X which costs a "little" more than $3.5k...

So playing with a 200MHz Tek to be able to reach a 1.5GHz Tek also sounds very interesting.
 

Offline klaus11

  • Supporter
  • ****
  • Posts: 156
  • Country: 00
Re: Tektronix New Scope June 4th!
« Reply #79 on: May 17, 2019, 10:59:44 am »
HP3458A, HP3245a, Keithley 2000, Fluke 87V, Rigol DP832, TEK TDS5052B, HP33120A
 
The following users thanked this post: salvagedcircuitry

Online JPortici

  • Super Contributor
  • ***
  • Posts: 3461
  • Country: it
Re: Tektronix New Scope June 4th!
« Reply #80 on: May 17, 2019, 11:19:39 am »
tekscope_funny_product_brochure.pdf

:palm: besides being more than one month late... that name.. ugh

 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New Scope June 4th!
« Reply #81 on: May 17, 2019, 12:32:11 pm »
Looks like I got this one wrong! although there may still be a 4 Series MSO.

There is a new 3 Series MDO (Mixed domain). Separate digital channels.
May not use any of the new 5 series ASIC tech? Perhaps just a GUI revamp to bring the old MDO up to snuff with the new "Series" look?



« Last Edit: May 17, 2019, 12:35:48 pm by EEVblog »
 

Offline simone.pignatti

  • Frequent Contributor
  • **
  • Posts: 367
  • Country: it
Re: Tektronix New Scope June 4th!
« Reply #82 on: May 17, 2019, 12:46:09 pm »
Interesting, before I posted the MDO44/46 list I also looked for something like MDO34/36 but couldn't find anything
 :popcorn: :popcorn: :popcorn:
Technical Support
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New Scope June 4th!
« Reply #83 on: May 17, 2019, 12:55:46 pm »
Interesting, before I posted the MDO44/46 list I also looked for something like MDO34/36 but couldn't find anything

My Google Foo is superior  :P

It's actually public on Tektronix's website, which is were I got the screen capture of the info blurb
The product URL is restricted though.
 

Offline simone.pignatti

  • Frequent Contributor
  • **
  • Posts: 367
  • Country: it
Re: Tektronix New Scope June 4th!
« Reply #84 on: May 17, 2019, 12:58:41 pm »
Interesting, before I posted the MDO44/46 list I also looked for something like MDO34/36 but couldn't find anything

My Google Foo is superior  :P

It's actually public on Tektronix's website, which is were I got the screen capture of the info blurb
The product URL is restricted though.
here is the model list:
MDO34 3-BW-100 oscilloscope 100MHz
MDO34 3-BW-200 oscilloscope 200MHz
MDO34 3-BW-350 oscilloscope 350MHz
MDO34 3-BW-500 oscilloscope 500MHz
MDO34 3-BW-1000 oscilloscope 1GHz
Technical Support
 

Offline simone.pignatti

  • Frequent Contributor
  • **
  • Posts: 367
  • Country: it
Re: Tektronix New Scope June 4th!
« Reply #85 on: May 17, 2019, 01:11:32 pm »
Technical Support
 

Offline klaus11

  • Supporter
  • ****
  • Posts: 156
  • Country: 00
HP3458A, HP3245a, Keithley 2000, Fluke 87V, Rigol DP832, TEK TDS5052B, HP33120A
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New Scope June 4th!
« Reply #87 on: May 17, 2019, 02:41:19 pm »
 

Offline TheDefpom

  • Frequent Contributor
  • **
  • Posts: 707
  • Country: nz
  • YouTuber Nerd - I Fix Stuff
    • The Defpom's Channel
Re: Tektronix New Scope June 4th!
« Reply #88 on: May 17, 2019, 08:13:06 pm »
That latest find is an MDO, they stated the new one is an MSO, so I would stick with the original theory.
Cheers Scott

Check out my Electronics Repair, Mailbag, or Review Videos at https://www.youtube.com/TheDefpom
 

Offline snoopy

  • Frequent Contributor
  • **
  • Posts: 767
  • Country: au
    • Analog Precision
Re: Tektronix New Scope June 4th!
« Reply #89 on: May 18, 2019, 12:46:38 am »
Looks like I got this one wrong! although there may still be a 4 Series MSO.

There is a new 3 Series MDO (Mixed domain). Separate digital channels.
May not use any of the new 5 series ASIC tech? Perhaps just a GUI revamp to bring the old MDO up to snuff with the new "Series" look?


The spectrum analyser input is a dead giveaway that it is an MDO3000. Hopefully they have improved this design and not just put the old one in a new case ;)
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New Scope June 4th!
« Reply #90 on: May 18, 2019, 12:49:16 am »
That latest find is an MDO, they stated the new one is an MSO, so I would stick with the original theory.

It's now obvious they are using plural "Scopes", so more than one.
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New Scope June 4th!
« Reply #91 on: May 18, 2019, 12:49:53 am »
The spectrum analyser input is a dead giveaway that it is an MDO3000. Hopefully they have improved this design and not just put the old one in a new case ;)

That should be evident once you start to use it in terms of performance.
 

Offline David Hess

  • Super Contributor
  • ***
  • Posts: 16615
  • Country: us
  • DavidH
Re: Tektronix New Scope June 4th!
« Reply #92 on: May 20, 2019, 03:57:20 am »
Is it a race to see who can have the controls with the least contrast?
 
The following users thanked this post: Kean, Fungus

Offline james_s

  • Super Contributor
  • ***
  • Posts: 21611
  • Country: us
Re: Tektronix New Scope June 4th!
« Reply #93 on: May 20, 2019, 05:48:13 am »
Low contrast light gray on lighter gray seems to be the "in" thing in recent years. Annoys the hell out of me too.
 
The following users thanked this post: Fungus

Offline Fungus

  • Super Contributor
  • ***
  • Posts: 16649
  • Country: 00
Re: Tektronix New Scope June 4th!
« Reply #94 on: May 20, 2019, 06:10:24 am »
All those old-school aggressive fonts must go!
 

Offline ResistorRobTopic starter

  • Regular Contributor
  • *
  • Posts: 115
  • Country: us
Re: Tektronix New Scope June 4th!
« Reply #95 on: May 21, 2019, 02:05:38 am »
Looks like I got this one wrong! although there may still be a 4 Series MSO.

Dave, I don't think you got it wrong. I think they are releasing a 3 and a 4 series. Look at the video. The one clearly shows the ability to change the palette on 6 channels and the 3 series is only 4 channels.  Did you see post by simmone? PS. I think this scope looks great! I don't mind the low contrast as it doesn't have many buttons due to the touchscreen and gives it a nice clean look.  I just wish Tek would stop giving a middle finger to the hobbyist market and make something under $2k that we would be proud to have on our benches.

3 Series
MDO34 3-BW-100 -  3-SERIES MIXED DOMAIN OSCILLOSCOPE - $4,600.00
MDO34 3-BW-200 -  3-SERIES MIXED DOMAIN OSCILLOSCOPE - $5,150.00
MDO34 3-BW-350 -  3-SERIES MIXED DOMAIN OSCILLOSCOPE - $9,600.00
MDO34 3-BW-500 -  3-SERIES MIXED DOMAIN OSCILLOSCOPE - $12,900.00
MDO34 3-BW-1000 -  3-SERIES MIXED DOMAIN OSCILLOSCOPE - $16,000.00
MDO34 3-BW-1000-DDU-DB-DEMO -  DEMO - 3-SERIES MIXED DOMAIN OSCILLOSCOPE - $16,850.00

4 Series
MSO46 4-BW-1500 - Oscilloscope 6 channels 1.5GHZ
MSO46 4-BW-1000 - Oscilloscope 6 channels 1.0GHZ
MSO46 4-BW-500 - Oscilloscope 6 channels 500MHZ
MSO46 4-BW-350 - Oscilloscope 6 channels 350MHZ
MSO46 4-BW-200 - Oscilloscope 6 channels 200MHZ
MSO44 4-BW-1500 - Oscilloscope 4 channels 1.5GHZ
MSO44 4-BW-1000 - Oscilloscope 4 channels 1.0GHZ
MSO44 4-BW-500 - Oscilloscope 4 channels 500MHZ
MSO44 4-BW-350 - Oscilloscope 4 channels 350MHZ
MSO44 4-BW-200 - Oscilloscope 4 channels 200MHZ
« Last Edit: May 21, 2019, 02:10:04 am by ResistorRob »
For my 10th Birthday I got a Fisher Price oscilloscope!
 

Offline mike1305

  • Contributor
  • Posts: 29
  • Country: us
  • Engineer by day, whisky by night
Re: Tektronix New 3/4-Series Scope (June 4th!)
« Reply #96 on: May 23, 2019, 11:14:21 pm »
Quote
MDO34 3-BW-1000-DDU-DB-DEMO -  DEMO - 3-SERIES MIXED DOMAIN OSCILLOSCOPE - $16,850.00

FWIW in regards to that price on the 1 GHz unit - that looks like pricing for a "demo" model that accidentally made it onto their website. Demo models are fully loaded with every option, highest BW, etc. and are only sold to distributors (or used my us directly) to use for demonstrations to customers. Should never be available to purchase by an end user. Super odd pricing though, being $860 more than the 1 GHz base unit. I'll have to think more about where that price might have came from. Keysight uses a 9 month time based "demo" license on these units so they can eventually be sold stock and optioned up after the've been on demo duty, but that demo license comes at no cost.
 

Offline snoopy

  • Frequent Contributor
  • **
  • Posts: 767
  • Country: au
    • Analog Precision
Re: Tektronix New 3/4-Series Scope (June 4th!)
« Reply #97 on: May 26, 2019, 02:16:08 am »
Another teaser video :D LOL

 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New 3/4-Series Scope (June 4th!)
« Reply #98 on: May 26, 2019, 08:45:43 am »
Another teaser video :D LOL



Lame.
It looks exactly like the 5 Series  ::)
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37740
  • Country: au
    • EEVblog
Re: Tektronix New 3/4-Series Scope (June 4th!)
« Reply #99 on: May 26, 2019, 08:49:01 am »
First pic of the new 4 series MSO
Uses the new Flexprobe interface, so you have to sacrifice analog channels for digital.
Not so on the new Series 3 MDO, that has a separate digital input and older probe interface.

« Last Edit: May 26, 2019, 08:53:55 am by EEVblog »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf