« previous next »
Pages: [1]   Go Down

Author Topic: Tektronix P6201 & 1101(A)  (Read 234 times)

0 Members and 1 Guest are viewing this topic.

Offline Antonio90Topic starter

  • Frequent Contributor
  • **
  • Posts: 295
  • Country: es
Tektronix P6201 & 1101(A)
« on: March 12, 2024, 12:36:31 pm »
Hello,
I have a Tektronix P6201 active FET probe, but haven't been able to find a reasonably priced matching PSU.
Googling around a bit, I found a post stating that the pinout on one of the manuals had the +15 and -15V pins swapped around.

Could someone with the PSU (or having made a substitute) confirm the pinout on the attached doc is correct?

Logged
 

Offline Antonio90Topic starter

  • Frequent Contributor
  • **
  • Posts: 295
  • Country: es
Re: Tektronix P6201 & 1101(A)
« Reply #1 on: March 12, 2024, 03:10:45 pm »
It was correct.
Just in case someone searchs for this same question. The red wire is +15V, the white one, -15, and the black wire, along with the shielding is ground (common with scope inputs)
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee