Products > Test Equipment
Tektronix P6201 & 1101(A)
(1/1)
Antonio90:
Hello,
I have a Tektronix P6201 active FET probe, but haven't been able to find a reasonably priced matching PSU.
Googling around a bit, I found a post stating that the pinout on one of the manuals had the +15 and -15V pins swapped around.

Could someone with the PSU (or having made a substitute) confirm the pinout on the attached doc is correct?

Antonio90:
It was correct.
Just in case someone searchs for this same question. The red wire is +15V, the white one, -15, and the black wire, along with the shielding is ground (common with scope inputs)
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod