Products > Test Equipment

Tektronix P6201 & 1101(A)

(1/1)

Antonio90:
Hello,
I have a Tektronix P6201 active FET probe, but haven't been able to find a reasonably priced matching PSU.
Googling around a bit, I found a post stating that the pinout on one of the manuals had the +15 and -15V pins swapped around.

Could someone with the PSU (or having made a substitute) confirm the pinout on the attached doc is correct?

Antonio90:
It was correct.
Just in case someone searchs for this same question. The red wire is +15V, the white one, -15, and the black wire, along with the shielding is ground (common with scope inputs)

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod