Products > Test Equipment
Tektronix TDS Scope Field Adjustment Software reverse engineering
<< < (5/11) > >>
DC1MC:

--- Quote from: TERRA Operative on February 19, 2023, 04:29:12 pm ---
--- Quote from: DC1MC on February 19, 2023, 04:14:13 pm ---OK, in MY archives I've discovered this gem (attached), could anyone confirm that is the real deal for TDS7xx series ?


--- End quote ---

Yep, it's a valid version.

I just edited the original post with a link to Google drive with all the FAS versions I have.
These are the install files, so they are copied to floppy disk and installed on the PC used for calibration which unpacks all the actual software and config files.

--- End quote ---

OK, so far so good, but now comes the question: is there any connection between this NI card and the above mentioned CEC488/KPC488.2 cards for which we have the SDK or they are unrelated to our stuff ?


TERRA Operative:
AFAIK, the Tek FAS will only see the NI GPIB-PCII/IIA cards. I've never tried anything else to see. I only have an IOtech ISA GPIB card (a Personal488, GP488B version) besides the PCII/IIA one.

If I can get my hands on a CEC488/KPC488.2 card, I can test it, but may be difficult here in Japan.


Also, I added links to some programmers manuals to the first post too, might give us some ideas.
DC1MC:

--- Quote from: TERRA Operative on February 19, 2023, 05:09:47 pm ---AFAIK, the Tek FAS will only see the NI GPIB-PCII/IIA cards. I've never tried anything else to see. I only have an IOtech ISA GPIB card (a Personal488, GP488B version) besides the PCII/IIA one.

If I can get my hands on a CEC488/KPC488.2 card, I can test it, but may be difficult here in Japan.


Also, I added links to some programmers manuals to the first post too, might give us some ideas.

--- End quote ---

Is there a SDK for these NI cards as well, as for the CEC488/KPC488.2, if so, where ? I'll enjoy having the headers and LIBs.
TERRA Operative:

--- Quote from: DC1MC on February 19, 2023, 05:19:40 pm ---
--- Quote from: TERRA Operative on February 19, 2023, 05:09:47 pm ---AFAIK, the Tek FAS will only see the NI GPIB-PCII/IIA cards. I've never tried anything else to see. I only have an IOtech ISA GPIB card (a Personal488, GP488B version) besides the PCII/IIA one.

If I can get my hands on a CEC488/KPC488.2 card, I can test it, but may be difficult here in Japan.


Also, I added links to some programmers manuals to the first post too, might give us some ideas.

--- End quote ---

Is there a SDK for these NI cards as well, as for the CEC488/KPC488.2, if so, where ? I'll enjoy having the headers and LIBs.

--- End quote ---
Hmm, after a few edits to this post, this is as close as I got:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019QOfSAM&l=en-US

https://www.ni.com/docs/en-US/bundle/ni-488.2-feature/page/programming-with-ni-4882-software.html#

I swear I was able to download drivers before, but not sure on an SDK.

Ah ha!

https://download.ni.com/#support/gpib/doswin3/gpib-pcii.iia/488.2/

Also drivers I am using are attached to this post.
DC1MC:
The DOS drivers and SDK for NI cards are here:

http://download.ni.com/#support/gpib/doswin3/

more specifically here:
http://download.ni.com/#support/gpib/doswin3/gpib-pcii.iia/

the FTP server does not allow anonymous login anymore :(

Now let's see what goodies are there  >:D
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod