Products > Test Equipment
Tektronix TDS1000B and TDS2000B series hacks
phecap:
I have a Tektronix TDS2024B.
Does anyone know if it is possible to upgrade this oscilloscope to TDS2024C?
Or is this not possible due to the hardware differences?
Fieroluke:
That should work. The main difference is the better LCD I think
vdetal:
You can, it's very simple. Download the latest firmware for the C-series from the Tek website. (this is TDS1K2KC_V24.26_066134800.zip). Unpack. It works for me if I rename the .tek firmware file. Rename the file TDS1K2KC.TEK to file TDS1K2KВ.TEK, write to a USB flash drive (I use 2GB). Well, then insert it into your TDS and follow the instructions.... Here is the result of the update with 2 different versions and it works even on a monochrome display:
lern01:
--- Quote from: vdetal on October 27, 2023, 10:16:43 pm ---You can, it's very simple. Download the latest firmware for the C-series from the Tek website. (this is TDS1K2KC_V24.26_066134800.zip). Unpack. It works for me if I rename the .tek firmware file. Rename the file TDS1K2KC.TEK to file TDS1K2KВ.TEK, write to a USB flash drive (I use 2GB). Well, then insert it into your TDS and follow the instructions.... Here is the result of the update with 2 different versions and it works even on a monochrome display:
--- End quote ---
Has your TDS1001B been upgraded to 2022B?
lern01:
--- Quote from: Fieroluke on February 24, 2023, 04:02:02 pm ---Success again!
Changed my TDS2001C from TDS2022B (ID $0B) to TDS2022C (ID $18)
--- End quote ---
Hello, I have a TDS2002C, I haven't understood your operation of modifying the checksum. Can you upload the pictures you performed on the eeprom editor? Or send me your 2022C firmware to lern01@outlook.com. Thanks!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version