Products > Test Equipment
Tektronix TDS1000B and TDS2000B series hacks
Silicium81:
Thank's for the méthod to hack TDS2000B 8)
I succeeded with the script to hack a TDS1001C-EDU (40MHz) to a TDS2022B (200MHz)!
I unsoldered the flash rom, read then reprogrammed with the content modified with the script. I slightly adapted it to recognize the identifier of the TDS1001C-EDU (0x28).
In pj, the modify script
@_Lis:
Silicium81,
Share the firmware flash S29JL064H90TF100 from TDS1001C-EDU, please?
Silicium81:
See here: https://www.eevblog.com/forum/repair/bad-firmware-installed-in-tds1001c-edu/msg4052302/#msg4052302
Or in http://www.ko4bb.com/ search TDS1001C 8)
@_Lis:
Silicium81,
Thank you very much!
Best regards!
@_Lis:
I had TDS1002C 1002 C-EDU (60 MHz 1GS/s) turning on with a white screen and not booting after incorrect update firmware via USB
https://www.eevblog.com/forum/repair/tektronix-tds1002c-doesnt-boot/msg890380/#msg890380
After flash http://www.ko4bb.com/manuals/5.166.55.99/Tektronix_TDS1001C-EDU_scope_40MHz_EPROM_V25.07.BIN.zip
the oscilloscope started to turn on, but TDS 1001C-EDU writes on the screen with a frequency of 40MHz, the serial number has changed.
Update firmware from the official website TDS1KC-EDU_V25.11_066123303 did not help, the frequency is still 40 MHz
Please help to restore.
Thank you in advance.
Sorry for the English:(
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version