Products > Test Equipment
Test Equipment Anonymous (TEA) group therapy thread
<< < (24957/27437) > >>
bd139:

--- Quote from: Specmaster on July 01, 2022, 08:09:11 am ---
--- Quote from: Cerebus on July 01, 2022, 12:51:56 am ---
--- Quote from: bd139 on June 30, 2022, 09:17:54 pm ---Random weird night out, in Brentford of all places! One for the London locals…

--- End quote ---

Did you drop into the Flying Swan for a pint of Large?

--- End quote ---
Or the Fisherman Arms?

--- End quote ---

Had no idea the Brentford Trilogy Existed.

Alas the pub of choice was The Brewery Tap (pizza delivered to table from there) followed by The Beehive  :-DD
Specmaster:

--- Quote from: bd139 on July 01, 2022, 08:14:32 am ---
--- Quote from: Specmaster on July 01, 2022, 08:09:11 am ---
--- Quote from: Cerebus on July 01, 2022, 12:51:56 am ---
--- Quote from: bd139 on June 30, 2022, 09:17:54 pm ---Random weird night out, in Brentford of all places! One for the London locals…

--- End quote ---

Did you drop into the Flying Swan for a pint of Large?

--- End quote ---
Or the Fisherman Arms?

--- End quote ---

Had no idea the Brentford Trilogy Existed.

Alas the pub of choice was The Brewery Tap (pizza delivered to table from there) followed by The Beehive  :-DD

--- End quote ---
Do they still have live music in the Brewery Tap? Have been in there a few times as well, can't say I know the Beehive, although it is possible as I've done a few pub crawls in Brentford  :-DD

As to the Brentford Trilogy, it's such a secretive one that none of us were aware it existed either  :-DD :-DD
McBryce:

--- Quote from: Zucca on July 01, 2022, 01:13:38 am ---I am shopping for big amps connectors for my solar/battery system.

Can you guys tell me the best way to waste my money to use/connect/terminate those angry copper toys?



Knipex again?

EDIT, on my way....



--- End quote ---

Hi Zucca,
        aren't you in the car industry? The guys down in the workshop should have something like this lying around if you don't want to buy one yourself: https://www.joom.com/en/products/5febea76e3da9501068f9f0a

McBryce.
bd139:

--- Quote from: Specmaster on July 01, 2022, 08:33:13 am ---
--- Quote from: bd139 on July 01, 2022, 08:14:32 am ---
--- Quote from: Specmaster on July 01, 2022, 08:09:11 am ---
--- Quote from: Cerebus on July 01, 2022, 12:51:56 am ---
--- Quote from: bd139 on June 30, 2022, 09:17:54 pm ---Random weird night out, in Brentford of all places! One for the London locals…

--- End quote ---

Did you drop into the Flying Swan for a pint of Large?

--- End quote ---
Or the Fisherman Arms?

--- End quote ---

Had no idea the Brentford Trilogy Existed.

Alas the pub of choice was The Brewery Tap (pizza delivered to table from there) followed by The Beehive  :-DD

--- End quote ---
Do they still have live music in the Brewery Tap? Have been in there a few times as well, can't say I know the Beehive, although it is possible as I've done a few pub crawls in Brentford  :-DD

--- End quote ---

Yeah they do but not last night. We were mostly having to listen to the dude who runs the local porn shop, obvious because of the promotional t-shirt advertising his business. Oh and some passing Real Ale Twats



The Beehive is one with, well a beehive on the top on the corner by Morrisons...

m k:

--- Quote from: mansaxel on June 30, 2022, 10:58:35 pm ---Repair #1 today:



The tumble dryer saga continues. This time, it was the condensate pump, that would not pump if it was too much in the tank. Which is strange; it's a centrifugal pump and if they're normally picky about something, it's being not enough primed...  Took the combined debugging force of me and Wife to find and jury-rig it.

And, we're due to go on vacation tomorrow evening, so every garment is needed. Thus, we're running it in a cabbed-down mode to be able to bodge it quickly. Permanent fix likely is new pump. 

Repair # 2:

The jury-rigging and debugging of The Little Pump That Sometimes Could requires the use of one of my favourite Ultra-Bodgerstm, the Safe-Bloc. (Or in this case, the RS-branded "Quicktest".) Lid on mine has unfortunately developed a crack from the unfused link contact fingers; they were badly adjusted so did not go cleanly down in the receptacles, creating undue strain on the almost-Bakelite. Cyanoacrylate fortunately works very well on these plastics, so a few droplets of CA later it's functionally as good as new, and I was able to adjust the contacts to give a much smoother action, while also preventing a repeat accident.



--- End quote ---

Years and years ago I opened a clothes washer because it didn't remove water.
Everything was ok, only pump was stuck by foreign object.
The object was an L-shape part of a belt buckle frame, or that was the verdict, and missing from nowhere.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod