Products > Test Equipment
Test Equipment Anonymous (TEA) group therapy thread
exor:
--- Quote from: BU508A on July 03, 2022, 05:46:21 pm ---@Vince:
No need to fiddle around with funny hydraulic presses or so. Just get a set with an approbiate hydraulic tool for 209 Euro (NAWTS):
https://www.ebay.de/sch/i.html?_dkr=1&iconV2Request=true&_ssn=cnc-speedmetal&store_name=cncspeedmetal&_oac=1&_dmd=1&store_cat=11854325012
If you want good quality, go after the Greenlee sets but they are three times more expensive, if available.
--- End quote ---
Found this set for a price about of one new punch and die. It had some light rust and three worn out punches I left out. Now after some intensive cleaning I’m ready for serious punching 8)
tautech:
--- Quote from: exor on July 16, 2022, 10:03:50 pm ---
--- Quote from: BU508A on July 03, 2022, 05:46:21 pm ---@Vince:
No need to fiddle around with funny hydraulic presses or so. Just get a set with an approbiate hydraulic tool for 209 Euro (NAWTS):
https://www.ebay.de/sch/i.html?_dkr=1&iconV2Request=true&_ssn=cnc-speedmetal&store_name=cncspeedmetal&_oac=1&_dmd=1&store_cat=11854325012
If you want good quality, go after the Greenlee sets but they are three times more expensive, if available.
--- End quote ---
Found this set for a price about of one new punch and die. It had some light rust and three worn out punches I left out. Now after some intensive cleaning I’m ready for serious punching 8)
--- End quote ---
Really good score :-+
A few more dies in various shapes and you'll have a fantastic punch set ! :clap:
AVGresponding:
--- Quote from: exor on July 16, 2022, 10:03:50 pm ---
--- Quote from: BU508A on July 03, 2022, 05:46:21 pm ---@Vince:
No need to fiddle around with funny hydraulic presses or so. Just get a set with an approbiate hydraulic tool for 209 Euro (NAWTS):
https://www.ebay.de/sch/i.html?_dkr=1&iconV2Request=true&_ssn=cnc-speedmetal&store_name=cncspeedmetal&_oac=1&_dmd=1&store_cat=11854325012
If you want good quality, go after the Greenlee sets but they are three times more expensive, if available.
--- End quote ---
Found this set for a price about of one new punch and die. It had some light rust and three worn out punches I left out. Now after some intensive cleaning I’m ready for serious punching 8)
--- End quote ---
It is literally impossible to imagine any negative consequence from more Finnish participation in this thread.
mnementh:
--- Quote from: nixiefreqq on July 16, 2022, 06:33:20 pm ---was just down the basement bodging a little fan into an hp1740a. according to the fluke temp probe those poor little rectifier bridges were cooking along at 165-170 F. the replacement bridge was just as hot.
after installing the fan they all measure at 105-100 F.
while doing this i had a feeling that someone somewhere was talking about me.
no idea who it could have been, but thankfully you fine gentlemen would NEVER do such a thing.
--- End quote ---
I wasn't talking. I was listening and giggling. :-DD
mnem
gentle-dwagon, BTW. >:D
mnementh:
--- Quote from: bd139 on July 16, 2022, 06:55:58 pm ---
--- Quote from: nixiefreqq on July 16, 2022, 06:33:20 pm ---was just down the basement bodging a little fan into an hp1740a. according to the fluke temp probe those poor little rectifier bridges were cooking along at 165-170 F. the replacement bridge was just as hot.
after installing the fan they all measure at 105-100 F.
while doing this i had a feeling that someone somewhere was talking about me.
no idea who it could have been, but thankfully you fine gentlemen would NEVER do such a thing.
--- End quote ---
Oh hell those run super hot in the 1740A. My crappy solution:
From: https://www.eevblog.com/forum/testgear/hp-1740a-power-supply-burn-up/
The whole thread is worth referring to if you like HP pr0n.
--- End quote ---
Jeebus, bd... did you make a heat-sink from a fork?!?
What, are you bucking for med's crown as King of the Booty-Fab...? :-DD
mnem
:scared:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version