Author Topic: Test Equipment Anonymous (TEA) group therapy thread  (Read 14405998 times)

med6753 and 16 Guests are viewing this topic.

Offline Inverted18650

  • Frequent Contributor
  • **
  • Posts: 875
  • Country: us
    • Test Gear Addicts
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23725 on: January 28, 2019, 02:41:32 am »
with the 1432-N, 1432-M, and mod'd 1432-M, I am good from 0.1R - 110M. The next unit will start at 100M and get  up to (through) 10G.

Offline Neomys Sapiens

  • Super Contributor
  • ***
  • Posts: 3268
  • Country: de
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23726 on: January 28, 2019, 02:45:56 am »
I scored a REAL load in addition to the AC/DC-Electronics one AND a HP 4-quadrant power supply.
The load might work or not - we'll see.

Pictures here:
https://www.eevblog.com/forum/testgear/list-your-test-equipment-score-here!/msg2155729/#msg2155729

There is another one of the same type next week on Ebay.de.

I'm working on a triax adaptor kit now. One needs at least two 2-lug/3-lug and the other way round, adaptors to BNC, and there is a triax variant of TNC too. What I have is some in-series 3-lug stuff from Milbus activities. With this stuff, they all seem to have agreed on really scary pricing. :rant:
Must not be deterred. I will carry on until I can adapt any waveguide to random plumbing! :wtf:
« Last Edit: February 02, 2019, 03:53:24 am by Neomys Sapiens »
 
The following users thanked this post: Inverted18650

Offline SilverSolder

  • Super Contributor
  • ***
  • Posts: 6126
  • Country: 00
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23727 on: January 28, 2019, 02:48:43 am »

Did you mod these units?  -  The switches look "serious"!  :-+



 

Offline bitseekerTopic starter

  • Super Contributor
  • ***
  • Posts: 9057
  • Country: us
  • Lots of engineer-tweakable parts inside!
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23728 on: January 28, 2019, 03:24:48 am »
with the 1432-N, 1432-M, and mod'd 1432-M, I am good from 0.1R - 110M. The next unit will start at 100M and get  up to (through) 10G.

Nice collection you've got going.  :-+
TEA is the way. | TEA Time channel
 
The following users thanked this post: Inverted18650

Offline beanflying

  • Super Contributor
  • ***
  • Posts: 7355
  • Country: au
  • Toys so very many Toys.
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23729 on: January 28, 2019, 03:38:27 am »
Reminds me I must get back to building my 1M+ decade box  :)

Sorry to say Yanks but the Poms do Decade Switches better  :box:
Coffee, Food, R/C and electronics nerd in no particular order. Also CNC wannabe, 3D printer and Laser Cutter Junkie and just don't mention my TEA addiction....
 

Offline mnementh

  • Super Contributor
  • ***
  • Posts: 17541
  • Country: us
  • *Hiding in the Dwagon-Cave*
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23730 on: January 28, 2019, 03:48:59 am »
Next you'll be telling us you're strapped for time to clean it up to something like respectable.  ::)   :P :bullshit:
It's respectable. It's under the covers. It works. I'm not trying to win any beauty contests. Out of sight. Out of mind.  ;D
LOL, I know.....just poking some borax.  ;D

Like mnem I like to have them tidy under the hood just in some way to not hinder airflow and to have better access when chasing the dust out.
   

Mine's not that tidy. Absolute bare minimum to be functional and not a can of worms; I've actually mellowed quite a bit in my old age.  :-DD

I almost bought one of those NZXT H-series cases; I've always liked their design ethic. But it was twice as much as the Thermaltake V200 Amazon tempted me with:palm:

mnem
Where's Electro?
« Last Edit: January 28, 2019, 04:11:27 am by mnementh »
alt-codes work here:  alt-0128 = €  alt-156 = £  alt-0216 = Ø  alt-225 = ß  alt-230 = µ  alt-234 = Ω  alt-236 = ∞  alt-248 = °
 

Offline tautech

  • Super Contributor
  • ***
  • Posts: 28058
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23731 on: January 28, 2019, 04:07:59 am »
Pretty..................but 4 fans in one and 6 the other ?  :o :scared:
Avid Rabid Hobbyist
Siglent Youtube channel: https://www.youtube.com/@SiglentVideo/videos
 

Offline 0culus

  • Super Contributor
  • ***
  • Posts: 3032
  • Country: us
  • Electronics, RF, and TEA Hobbyist
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23732 on: January 28, 2019, 04:10:15 am »
with the 1432-N, 1432-M, and mod'd 1432-M, I am good from 0.1R - 110M. The next unit will start at 100M and get  up to (through) 10G.

I started my decade collection thanks to beanflying. Both Cambridge from the UK, one decade resistor and one decade capacitor.
 
The following users thanked this post: Inverted18650, beanflying

Offline mnementh

  • Super Contributor
  • ***
  • Posts: 17541
  • Country: us
  • *Hiding in the Dwagon-Cave*
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23733 on: January 28, 2019, 04:17:52 am »
Pretty..................but 4 fans in one and 6 the other ?  :o :scared:

Well, two of those in the V200 are from the radiator in the AIO LC... a poorly chosen layout. I'd have done a front-mount rad for that build.  :-+

While I'm no fan of the unicorn blarff color scheme they chose to showcase with that AIO LC unit, I can't wait 'til the V200 case gets here. I can't find my bin of fans to replace the 80mm in the back of the HP with something larger and/or thermal-controlled, and it's driving me starkers.   |O

mnem
*Juiced*
« Last Edit: January 28, 2019, 04:24:05 am by mnementh »
alt-codes work here:  alt-0128 = €  alt-156 = £  alt-0216 = Ø  alt-225 = ß  alt-230 = µ  alt-234 = Ω  alt-236 = ∞  alt-248 = °
 

Offline Inverted18650

  • Frequent Contributor
  • **
  • Posts: 875
  • Country: us
    • Test Gear Addicts
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23734 on: January 28, 2019, 04:43:15 am »
why?...well, because I am mentally ill, its a sickness

Online med6753

  • Super Contributor
  • ***
  • Posts: 11311
  • Country: us
  • Tek nut
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23735 on: January 28, 2019, 04:48:15 am »
Pretty..................but 4 fans in one and 6 the other ?  :o :scared:

Well, two of those in the V200 are from the radiator in the AIO LC... a poorly chosen layout. I'd have done a front-mount rad for that build.  :-+

While I'm no fan of the unicorn blarff color scheme they chose to showcase with that AIO LC unit, I can't wait 'til the V200 case gets here. I can't find my bin of fans to replace the 80mm in the back of the HP with something larger and/or thermal-controlled, and it's driving me starkers.   |O

mnem
*Juiced*

I have these fans and no use for them. You want them? Say the word...  :-+

An old gray beard with an attitude.
 
The following users thanked this post: mnementh

Offline Inverted18650

  • Frequent Contributor
  • **
  • Posts: 875
  • Country: us
    • Test Gear Addicts
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23736 on: January 28, 2019, 04:53:07 am »

Did you mod these units?  -  The switches look "serious"!  :-+

Hey mate, if this is for me, no I didn't build the M decade box. I am building the G box though, with triax connectors.

Offline mnementh

  • Super Contributor
  • ***
  • Posts: 17541
  • Country: us
  • *Hiding in the Dwagon-Cave*
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23737 on: January 28, 2019, 05:09:17 am »
Pretty..................but 4 fans in one and 6 the other ?  :o :scared:

Well, two of those in the V200 are from the radiator in the AIO LC... a poorly chosen layout. I'd have done a front-mount rad for that build.  :-+

While I'm no fan of the unicorn blarff color scheme they chose to showcase with that AIO LC unit, I can't wait 'til the V200 case gets here. I can't find my bin of fans to replace the 80mm in the back of the HP with something larger and/or thermal-controlled, and it's driving me starkers.   |O

mnem
*Juiced*
   I have these fans and no use for them. You want them? Say the word...  :-+ 

The word is "maybe". ;) I'll make that decision when I have a chance to see where I'm going with this build.  :-+ I'm planning to mod in a CPU thermometer and maybe try to shoehorn my drive bays right there at the front of the PSU channel. And maybe a USB3.0 card reader. And maybe a phased plasma rifle in the 40KW range...  :P

Thank you!  8)

mnem
*Poke-knackered*

Thank you!
« Last Edit: January 28, 2019, 05:10:54 am by mnementh »
alt-codes work here:  alt-0128 = €  alt-156 = £  alt-0216 = Ø  alt-225 = ß  alt-230 = µ  alt-234 = Ω  alt-236 = ∞  alt-248 = °
 

Offline 0culus

  • Super Contributor
  • ***
  • Posts: 3032
  • Country: us
  • Electronics, RF, and TEA Hobbyist
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23738 on: January 28, 2019, 06:19:53 am »
why?...well, because I am mentally ill, its a sickness

If that's mental illness, where can I get some?  :-DD
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12281
  • Country: au
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23739 on: January 28, 2019, 09:19:19 am »
Just hang around here ..... It'll come.
 

Offline syau

  • Frequent Contributor
  • **
  • Posts: 368
  • Country: hk
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23740 on: January 28, 2019, 10:02:39 am »
The seller wouldn't let me take these either, so I am sure they'll pop u on eBay or they'll come back trying to sell them here. There are a few brother's that get various pieces, etc...a bunch o shit. If they come back, dont get sucked in.

https://www.ebay.com/itm/Fluke-A40-Current-Shunt-Set/132932249334

 
The following users thanked this post: Inverted18650

Offline beanflying

  • Super Contributor
  • ***
  • Posts: 7355
  • Country: au
  • Toys so very many Toys.
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23741 on: January 28, 2019, 10:05:18 am »
And the Standard Boxed Resistor too. More than dissapointing :horse:
Coffee, Food, R/C and electronics nerd in no particular order. Also CNC wannabe, 3D printer and Laser Cutter Junkie and just don't mention my TEA addiction....
 

Offline Specmaster

  • Super Contributor
  • ***
  • Posts: 14483
  • Country: gb
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23742 on: January 28, 2019, 11:15:28 am »
Wow this is some serious 3D printer and printing  :-DD

Who wants one these? If I was to do 3D printing, this is the kind of stuff I'd want to make thats for sure.

https://www.bbc.co.uk/news/video_and_audio/headlines/46894072/nera-the-3d-printed-electric-motorbike
Who let Murphy in?

Brymen-Fluke-HP-Thurlby-Thander-Tek-Extech-Black Star-GW-Avo-Kyoritsu-Amprobe-ITT-Robin-TTi
 

Offline Specmaster

  • Super Contributor
  • ***
  • Posts: 14483
  • Country: gb
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23743 on: January 28, 2019, 11:48:51 am »
With all the talk on here recently about wasp zapping, I thought you'd all like this what I stumbled across in my YouTube recommended viewing list.


« Last Edit: January 28, 2019, 02:02:29 pm by Specmaster »
Who let Murphy in?

Brymen-Fluke-HP-Thurlby-Thander-Tek-Extech-Black Star-GW-Avo-Kyoritsu-Amprobe-ITT-Robin-TTi
 

Online med6753

  • Super Contributor
  • ***
  • Posts: 11311
  • Country: us
  • Tek nut
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23744 on: January 28, 2019, 12:37:56 pm »
Yellow Jackets are the devil's army.  :scared: If we found an underground nest we'd pour gasoline down the hole and light it.  :o
An old gray beard with an attitude.
 

Offline Specmaster

  • Super Contributor
  • ***
  • Posts: 14483
  • Country: gb
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23745 on: January 28, 2019, 01:21:36 pm »
Yeh, I hate those critters, I have electronic zapper racket that I love to fry them with, they do smoke however when zapped and that stinks  :-DD
Who let Murphy in?

Brymen-Fluke-HP-Thurlby-Thander-Tek-Extech-Black Star-GW-Avo-Kyoritsu-Amprobe-ITT-Robin-TTi
 

Offline bd139

  • Super Contributor
  • ***
  • Posts: 23017
  • Country: gb
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23746 on: January 28, 2019, 01:56:41 pm »
We had a nest on the shed in the back garden a few years ago. That's a metal shed so they got doused in an entire bottle of 99% isopropyl and then lit up. I did this at night for effect. Total carnage. All gone in seconds.

Ground diggers wasps are the real bastards. I still have burn marks on my lawn from disposing of them three years later  :-DD
 

Offline mnementh

  • Super Contributor
  • ***
  • Posts: 17541
  • Country: us
  • *Hiding in the Dwagon-Cave*
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23747 on: January 28, 2019, 02:09:21 pm »
Yup. They'll sting so fast... by the time you realize what's happening, there's a line of stings up your leg like stitches from a sewing machine.

And THEN they fucking swarm you.  :scared:

mnem
Shit... I can feel my face starting to swell up just remembering...  :o
alt-codes work here:  alt-0128 = €  alt-156 = £  alt-0216 = Ø  alt-225 = ß  alt-230 = µ  alt-234 = Ω  alt-236 = ∞  alt-248 = °
 

Offline mnementh

  • Super Contributor
  • ***
  • Posts: 17541
  • Country: us
  • *Hiding in the Dwagon-Cave*
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23748 on: January 28, 2019, 02:38:59 pm »
Wow this is some serious 3D printer and printing  :-DD

Who wants one these? If I was to do 3D printing, this is the kind of stuff I'd want to make thats for sure.

https://www.bbc.co.uk/news/video_and_audio/headlines/46894072/nera-the-3d-printed-electric-motorbike

My ballsack is just cringing at the idea of riding those cellular tires on anything but astroturf. And the "motorcyclist" in me cringes at the idea of how sloppy everything on the frame will feel after just a few hours riding, and how the entire COG is going to be out to lunch with that single hub motor. You notice they don't dare ride the fucking thing at anything approaching highway speeds. :palm:

[EDIT]

But yeah; really nifty on the large-scale 3D printing technology... not entirely sanguine about this project as an example though. A $40,000 printer + $2,600 in materials = a street motorcycle that's not fit for purpose; little more than a novelty.  :o

[/EDIT]

mnem
*poit!*
« Last Edit: January 28, 2019, 04:08:34 pm by mnementh »
alt-codes work here:  alt-0128 = €  alt-156 = £  alt-0216 = Ø  alt-225 = ß  alt-230 = µ  alt-234 = Ω  alt-236 = ∞  alt-248 = °
 

Offline Specmaster

  • Super Contributor
  • ***
  • Posts: 14483
  • Country: gb
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #23749 on: January 28, 2019, 04:20:06 pm »
All very true of course but just look at that finished quality unless your going to tell me that each piece has been sanded to perfection  :-//

Mock all you like, but think back to the Wright Brothers and how they must have been mocked with their heavier then air machine and its first few feet of flight compared with what we have achieved today with planes made out of metal many times heavier than their machine  :popcorn:



Toddles back  to back to wrestling with electronic cad programs  :palm:
« Last Edit: January 28, 2019, 04:21:59 pm by Specmaster »
Who let Murphy in?

Brymen-Fluke-HP-Thurlby-Thander-Tek-Extech-Black Star-GW-Avo-Kyoritsu-Amprobe-ITT-Robin-TTi
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf