Author Topic: Test Equipment Anonymous (TEA) group therapy thread  (Read 14557711 times)

K0ELB and 16 Guests are viewing this topic.

Offline worsthorse

  • Super Contributor
  • ***
  • Posts: 1237
  • Country: us
  • aina varma, usein väärin
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42950 on: November 17, 2019, 04:10:06 am »
No work at the bench this week; too much real life going on.

I did get the DMR radio unbricked and programmed. Now that I have beat it into submission and used it long enough to confirm my suspicion that 2M DMR is the same wasteland as 2M repeater analog, only with more empty channels and worse audio quality, I can box it up and sell it.

I also reposted, and subsequently sold, another of the Tek signal generators, my "spare" 191. Got asking price plus shipping for it, which is nice when it happens. I think I've decided to hang on to the rest of the "scope calibration generators" for now. 

Tomorrow, I am hoping to get back to figuring out what's going on with the time mark generator. There just shouldn't be so much of the RF signal on the power rails or mixed into the trigger output. Probably bad filter capacitors in several places. 
specialization is for insects.
 
The following users thanked this post: mnementh

Offline Black Phoenix

  • Super Contributor
  • ***
  • Posts: 1129
  • Country: hk
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42951 on: November 17, 2019, 04:12:12 am »
Your ticket to hell just got upgraded to Business class.

At least he have now more space for the legs, and preferential service. It will make the trip less painful... :-DD
 
The following users thanked this post: factory

Offline Brumby

  • Supporter
  • ****
  • Posts: 12288
  • Country: au
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42952 on: November 17, 2019, 04:16:26 am »
At least the front panel was left alone.


That's not an invitation, either!
 

Offline 0culus

  • Super Contributor
  • ***
  • Posts: 3032
  • Country: us
  • Electronics, RF, and TEA Hobbyist
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42953 on: November 17, 2019, 04:23:24 am »
Soooo, yours truly may or may not have scored a bunch of gear at an auction. This time, it's mostly projects.  :palm: Pictures forthcoming when I have a chance to get stuff organized.

2x Data Precision Data 6000 digitizer mainframes with model 620 plugins (have some flakiness going on that might be the plugins or user error?)*
Another Tek P6042 to serve as a parts donor as needed
Another Tek P6015 HV probe (sans 114 flourocarbon of course)
HP 438A dual sensor power meter (powers on  but no display unless one of the test modes is triggered)
Dyna-Empire D888 Gaussmeter with carrying case and probe


* Anyone know where to get manuals for these? If I can get one working it will be a perfect companion for my Data Precision 2045, which can be made to play back waveforms digitized by the 6000.  :-+
 
The following users thanked this post: Kosmic

Offline Brumby

  • Supporter
  • ****
  • Posts: 12288
  • Country: au
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42954 on: November 17, 2019, 04:30:25 am »
On TEA stuff (rather than coffee) I wonder if @Brumby would like to go out on the limb a bit further and provide his better half a chainsaw  :-DD eBay auction: #193201949768



Hell in a handbasket - and you're inviting me to buy a first class ticket.   :palm:

That's not a boat anchor - it's a breakwater!

About 6 hours to go on this - and I've had numerous thoughts about it.  It is not a petite it of kit.  I simply do not have the space around my desk/workbench and I'm not about to relegate it to the garage.

Also, this statement is not inspiring: “Is in fair cosmetic condition somewhat functions but plugin is low on gain and storage now refuses to function (was ok last time tried)”.  I'm not really enthusiastic about a repair on such a beast.  For a start, I'm going to need a bigger bench.


Edit:  Aw heck.  I'll throw something at it (if I remember in time) but it won't be anything bold.
« Last Edit: November 17, 2019, 04:32:10 am by Brumby »
 

Offline worsthorse

  • Super Contributor
  • ***
  • Posts: 1237
  • Country: us
  • aina varma, usein väärin
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42955 on: November 17, 2019, 05:23:57 am »

873710-0

A prime example of boat anchor-voltnut-ness... nixies, high voltages, giant heatsinks, too large for your bench, and weighs more than all your DMMs put together (hell you can throw in a scope, too, prolly). What's not to love?

I won't bite (I don't think) but maybe somebody close enough to pick it up rather than pay two hundred bucks in freight shipping will...

eBay auction: #283562586328
specialization is for insects.
 
The following users thanked this post: bd139, factory, Kosmic

Online beanflying

  • Super Contributor
  • ***
  • Posts: 7358
  • Country: au
  • Toys so very many Toys.
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42956 on: November 17, 2019, 05:51:27 am »
On TEA stuff (rather than coffee) I wonder if @Brumby would like to go out on the limb a bit further and provide his better half a chainsaw  :-DD eBay auction: #193201949768



Hell in a handbasket - and you're inviting me to buy a first class ticket.   :palm:

That's not a boat anchor - it's a breakwater!

About 6 hours to go on this - and I've had numerous thoughts about it.  It is not a petite it of kit.  I simply do not have the space around my desk/workbench and I'm not about to relegate it to the garage.

Also, this statement is not inspiring: “Is in fair cosmetic condition somewhat functions but plugin is low on gain and storage now refuses to function (was ok last time tried)”.  I'm not really enthusiastic about a repair on such a beast.  For a start, I'm going to need a bigger bench.


Edit:  Aw heck.  I'll throw something at it (if I remember in time) but it won't be anything bold.

Now passing $150 AU pesos with four hours to go. PASS this one up I reckon but  :popcorn: and watch ;)
Coffee, Food, R/C and electronics nerd in no particular order. Also CNC wannabe, 3D printer and Laser Cutter Junkie and just don't mention my TEA addiction....
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12288
  • Country: au
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42957 on: November 17, 2019, 06:35:56 am »
THAT high with 4 full hours still to go?

Not in the game any more - but I'll be up in the stands watching.
« Last Edit: November 17, 2019, 06:37:55 am by Brumby »
 

Offline med6753

  • Super Contributor
  • ***
  • Posts: 11313
  • Country: us
  • Tek nut
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42958 on: November 17, 2019, 07:03:01 am »

(Attachment Link)

A prime example of boat anchor-voltnut-ness... nixies, high voltages, giant heatsinks, too large for your bench, and weighs more than all your DMMs put together (hell you can throw in a scope, too, prolly). What's not to love?

I won't bite (I don't think) but maybe somebody close enough to pick it up rather than pay two hundred bucks in freight shipping will...

eBay auction: #283562586328

Bloomfield, Connecticut is near Hartford and within 2 hours driving (one way) for me. But no thanks. 98 pounds??!!  :scared: :scared:
An old gray beard with an attitude.
 

Offline Martin.M

  • Frequent Contributor
  • **
  • Posts: 953
  • Country: de
  • in Tek we trust
    • vintage Tek collection
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42959 on: November 17, 2019, 07:16:41 am »
3458A

blue  8) 8) 8) I need one.

about Tek549: I have 2 of them here  :)
« Last Edit: November 17, 2019, 07:20:13 am by Martin.M »
 

Offline med6753

  • Super Contributor
  • ***
  • Posts: 11313
  • Country: us
  • Tek nut
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42960 on: November 17, 2019, 07:26:54 am »
There you go, fixed it for @med.



David

Your ticket to hell just got upgraded to Business class.

Even I agree that doesn't look right.  :-- Should remain all black.
An old gray beard with an attitude.
 

Offline nfmax

  • Super Contributor
  • ***
  • Posts: 1556
  • Country: gb
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42961 on: November 17, 2019, 09:15:28 am »
hey mnem 

enjoyed your river pics.  have not been there in 54 years.

but you accidently pushed a button of mine (a button without an "=").

tesla was a very very good engineer.  but he was no genius. 

Oliver Heaviside was an actual genius, and he gets credit for.......DICK.

(people are always hatin' on redheads.)

https://en.wikipedia.org/wiki/Oliver_Heaviside

edit - they should make a movie about HIM.

edit 2 one of our cats is named for HIM.

I agree wrt Heaviside. In addition to being, well, a pain in the ass to everyone around him, he spent his life dealing with political hacks and fools, and his contributions to transmission line theory, field theory, and calculus were long glossed over.  It is worth reading his biography.

Also the book by Bruce Hunt: https://blackwells.co.uk/bookshop/product/The-Maxwellians-by-Bruce-J-Hunt-author/9780801482342

I got the impression that he was looked down upon somewhat because he had to work for a living, as a telegraph 'operator', as opposed to to academic contemporaries. However, as Hunt points out, the telegraph companies had the best facilities and the best state-of-the-art test gear (obligatory TEA reference) at the time.

Anyway he has a Layer named after him and he is the patron saint of Enheavyment - what more can mortal man desire?
 
The following users thanked this post: mnementh, worsthorse, nixiefreqq

Offline Martin.M

  • Frequent Contributor
  • **
  • Posts: 953
  • Country: de
  • in Tek we trust
    • vintage Tek collection
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42962 on: November 17, 2019, 09:24:24 am »




 \$\Omega\$ V

electronic soldiers: E80F SQ tubes, a gas stabi 150V, 2 pcs. FeH tubes
it have a glowing probe
« Last Edit: November 17, 2019, 09:35:22 am by Martin.M »
 
The following users thanked this post: edavid, Mortymore, Kosmic

Offline Mortymore

  • Frequent Contributor
  • **
  • Posts: 434
  • Country: pt
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42963 on: November 17, 2019, 10:09:27 am »
Those tubes look like they're wearing WW1 German helmets, on a girl with braids ^-^
« Last Edit: November 17, 2019, 10:12:05 am by Mortymore »
 

Offline Martin.M

  • Frequent Contributor
  • **
  • Posts: 953
  • Country: de
  • in Tek we trust
    • vintage Tek collection
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42964 on: November 17, 2019, 10:21:02 am »


this is the warm RF probe, AC up to 30V
Telefunken E91AA = 6AL5W, EAA91 do the job also.
« Last Edit: November 17, 2019, 10:25:45 am by Martin.M »
 
The following users thanked this post: edavid, med6753, bd139, Kosmic

Offline Brumby

  • Supporter
  • ****
  • Posts: 12288
  • Country: au
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42965 on: November 17, 2019, 10:26:41 am »


EBay just sent me an SMS telling me this auction will end in 13 minutes (now 11).  No change in price - nor my interest in bidding.

Will see what happens in the last minute....


Edit (not worth a new post)  Sold for $182.50.  Winning bid came in the very last second.
« Last Edit: November 17, 2019, 10:41:01 am by Brumby »
 

Offline Martin.M

  • Frequent Contributor
  • **
  • Posts: 953
  • Country: de
  • in Tek we trust
    • vintage Tek collection
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42966 on: November 17, 2019, 10:31:46 am »
this is the newer 1A1 plugin with Fet-inputs.
the old 1A1 use there nuvistors.
 

Offline bd139

  • Super Contributor
  • ***
  • Posts: 23018
  • Country: gb
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42967 on: November 17, 2019, 10:37:11 am »
(Attachment Link)

this is the warm RF probe, AC up to 30V
Telefunken E91AA = 6AL5W, EAA91 do the job also.

Now that’s rather sexy. Good for winter radio work  :-+
 

Offline McBryce

  • Super Contributor
  • ***
  • Posts: 2681
  • Country: de
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42968 on: November 17, 2019, 10:43:38 am »
Additionally, I just bought one of these: https://www.ebay.com/itm/Upgrade-Aluminum-Extruder-Drive-Feed-Frame-For-Creality-Ender-3-3D-Printer-/292865286118

Not because Aliminium is any better than the acryllic one that's there already, but mainly because the hole in the black one is almost impossible to find without turning the machine around (I can't access it from the side). So the red colour along with the tapered inlet should make things a bit easier.

McBryce.

That's interesting. Have the same problem trying to find the hole in the thing. Added to pimping list  :-DD

Some feedback for @bd139 (and other Ender 3 users). I replaced the extruder feed parts with the aluminium one. Easy 5 minute job. The new one works a treat. HOWEVER!!! The old acryllic one has already started to wear a channel from the PLA and I've only had the printer for about a month, with moderate use!! The wear is on the inner side. The newer feeders have a metal insert on the outer side which not only makes blind insertion almost impossible, but also stops the PLA from wearing through the material on that side.

So I'd advise others to keep an eye on this and the aluminium feeder is no longer a nice to have, rather something you'll need in the near future.

McBryce.


30 Years making cars more difficult to repair.
 

Online beanflying

  • Super Contributor
  • ***
  • Posts: 7358
  • Country: au
  • Toys so very many Toys.
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42969 on: November 17, 2019, 10:50:51 am »
Part of the reason I developed this addon for the Ender 3 (far Right). The others are replacement filament sensor switch holders for the CR10. https://www.eevblog.com/forum/chat/3d-printer-yet/msg1913924/#msg1913924



I have one of the Aluminium Kits but I haven't fitted it to any of the fleet yet.
Coffee, Food, R/C and electronics nerd in no particular order. Also CNC wannabe, 3D printer and Laser Cutter Junkie and just don't mention my TEA addiction....
 

Offline Alfons

  • Regular Contributor
  • *
  • Posts: 176
  • Country: de
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42970 on: November 17, 2019, 11:11:27 am »
If you wanted to do something good for your 3D printer, give him a "titan extruder" from Trianglelab (Ali). Definitely the Trianglelab or the original (very expensive). All trouble is over then. Have that behind me too. Since I've installed that, I do not even remember that an extruder is installed at all.

Here is my toy, all DIY, derived from a MKC

« Last Edit: November 17, 2019, 11:25:05 am by Alfons »
 

Offline tggzzz

  • Super Contributor
  • ***
  • Posts: 19281
  • Country: gb
  • Numbers, not adjectives
    • Having fun doing more, with less
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42971 on: November 17, 2019, 11:16:52 am »

Edit (not worth a new post)  Sold for $182.50.  Winning bid came in the very last second.

How many valves in it? What are they worth? :(
There are lies, damned lies, statistics - and ADC/DAC specs.
Glider pilot's aphorism: "there is no substitute for span". Retort: "There is a substitute: skill+imagination. But you can buy span".
Having fun doing more, with less
 

Online beanflying

  • Super Contributor
  • ***
  • Posts: 7358
  • Country: au
  • Toys so very many Toys.
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42972 on: November 17, 2019, 11:17:16 am »
If you wanted to do something good for your 3D printer, give him a "titan extruder" from Trianglelab (Ali). Definitely the Trianglelab or the original (very expensive). All trouble is over then. Have that behind me too. Since I've installed that, I do not even remember that an extruder is installed at all.



Spending to many $ on a cheap printer doesn't make a sense for average use. The teflon guide and Capricorn Bowden on one of my Enders has been working great for a few $ spent https://www.captubes.com/ . The Cap tube tightened up the retraction needed and overall is a good upgrade.

The other one I spent way to many $$$ on a Flexion direct drive but it fills a purpose when needed.
Coffee, Food, R/C and electronics nerd in no particular order. Also CNC wannabe, 3D printer and Laser Cutter Junkie and just don't mention my TEA addiction....
 

Offline Alfons

  • Regular Contributor
  • *
  • Posts: 176
  • Country: de
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42973 on: November 17, 2019, 11:27:15 am »
Especially the cheap printers benefit from a few improvements.:)
 

Offline med6753

  • Super Contributor
  • ***
  • Posts: 11313
  • Country: us
  • Tek nut
Re: Test Equipment Anonymous (TEA) group therapy thread
« Reply #42974 on: November 17, 2019, 11:53:00 am »

Edit (not worth a new post)  Sold for $182.50.  Winning bid came in the very last second.

How many valves in it? What are they worth? :(

Mucho...and individually worth much more than the selling price.
An old gray beard with an attitude.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf