Test Equipment Anonymous (TEA) group therapy thread

[bd139]

Hahaha that's a fucking amazing idea 

[Specmaster]

Yep. I'm going to do some digging and find out where the piece of shit lives and what he's been up to. I'm wondering if he is actually nuts or being paid to produce this shit (like stephen yaxley-lennon is)

I was just wondering if he is in the pay of some foreign power, to incite civil unrest, which he is already having some success at how far does this go, are there connections to the whole Brexit shenanigans as well?

[Saskia]

well, you don't happen to have his GPS coordinates ?
A good boy could just uplink that to a predator or something.

What a fucktard.

[bd139]

Yep. I'm going to do some digging and find out where the piece of shit lives and what he's been up to. I'm wondering if he is actually nuts or being paid to produce this shit (like stephen yaxley-lennon is)

I was just wondering if he is in the pay of some foreign power, to incite civil unrest, which he is already having some success at how far does this go, are there connections to the whole Brexit shenanigans as well?

Depends on funding structure. The deeper you look the more you find. I haven't looked deeply yet. Need to go to Asda 

well, you don't happen to have his GPS coordinates ?
A good boy could just uplink that to a predator or something.

What a fucktard.

At the location there would be collateral damage unfortunately so not viable. I would however walk into the local flat-roofed pub [1] and loudly make sure some nasty bastards heard there was a fresh pedophile moved into the area:

Reference [1]

[Saskia]

just take that power supply board, wet his nuts, clamp it to them and give it a go.

[Specmaster]

Here is some more info.

The first 2 are trying to debunk him.

Edit. Shopping calls BRB.

[Saskia]

@med6753 I have indeed submitted a bid (165) for that Tek scope by now, however I will not raise it.

Found out why I had a low frequency hum on my stereo and fixed it (bloody cable)
Set up the Technics SL-Q3, since I am outta space it's improvise adapt overcome again, this time with IKEA.
Warned hubby not to run into it.

Also picked up a nice RTX2060 to add some processing power to my next neural network experiments. It is currently undergoing decontamination (yeah, I am overdoing it, but so what)

and sent shitloads of greenbacks to one of those chinese joints for
- ozone generator (hubby sez I am nuts and need to stick to UV-C)
- TS 100 portable soldering gizmo
- USB based eprom burner that does not require a parallel port in an XP VM

Also they have the creality ender and the resin based gizmo on sale. The lithography thing is up for 240 euros. I am tempted.
With the ender I could always ask mnementh for help ...

[BU508A]

No wonder we have muppets running around destroying 5G towers, someone should section this idiot quickly, lock him up and then throw away the key, he is clearly a dangerous person to have running around stirring up conspiracy theories and fake information like this. 

Done my bit



Also reported it under "domestic terrorism"

I've attacked a few other responses as well.

Left a comment there as well. What an idiot.   

[McBryce]

Anyone in Germany looking for something to do for the next few months... https://www.ebay.de/itm/283845983298

McBryce.

[beanflying]

......

and sent shitloads of greenbacks to one of those chinese joints for
- ozone generator (hubby sez I am nuts and need to stick to UV-C)
- TS 100 portable soldering gizmo
- USB based eprom burner that does not require a parallel port in an XP VM

Also they have the creality ender and the resin based gizmo on sale. The lithography thing is up for 240 euros. I am tempted.
With the ender I could always ask mnementh for help ...

Really like my TS100 I teamed it with a reasonable Boost converter and I can use it off my R/C packs or 12V batteries for portable.

Don't ask mnementh about an Ender he will want to re engineer it from the ground up Buy it assemble it and use it  Only go into Resin printers after doing a lot of research they are messy, smelly and use IPA and post curing for a result.

[Kosmic]

Clearly the guy has mental issue (probably schizophrenia). Someone will probably take care of him at some point ? I'm worried about his followers though. Surely they don't all have the same disease.

[bd139]

There are a lot of paid up people and a lot of idiots. Don’t assume it’s mental health immediately.

[Kosmic]

There are a lot of paid up people and a lot of idiots. Don’t assume it’s mental health immediately.

What would be the motive thought ? who would be against 5G like that and ready to use a wako rhetoric ?

To me it look like the poor bloke is mad and the followers are deeply ignorant and misinformed.

[bd139]

Read into this muppet. https://en.m.wikipedia.org/wiki/Tommy_Robinson_(activist)

Until a motive is established keep an open mind.

[Saskia]

left a comment as well ...

Only a complete and utterly ignorant fucktard would mistake a 3G antenna sending at 868 MW for a 5G Antenna ("weapon delivery system", yeah right ..." and mistake a switching power supply (a step down)  for a high energy delivery system. With that tiny capacitor it is hard if not  impossible to do any real damage if you stood right next to it.
Here is some technical analysis with the specs sheets of your "weapon delivery system".
https://youtu.be/HM_aUduXK-U

[BU508A]

I've bought on ebay two nice TDK-Lambda power supplies for EUR 40.70:
Type: TDK-Lambda, Mod.: HWS100A - 24/A

https://www.ebay.com/itm/402207408582



They are still around @Mouser for example for ca. 100 Euro / piece:
https://www.mouser.de/ProductDetail/TDK-Lambda/HWS100A-24-A?qs=%2Fha2pyFadugztrDIo8Wds9rV2cIKdS7uw4JXkzN%2F4SM7qW3dBVjZGA%3D%3D

I want to use one for my Efratom Rubidium 10MHz frequency normal.




And here is a little update to my diy resistance decade box:

https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/msg2342892/#msg2342892

Some weeks ago I've ordered some red translucent acrylic stuff in China and today I made a little filter for the LEDs.

Before:


After (yes, I did some more filing for a better fitting  ):


I like the result.   

Edit: fixed typos

[BU508A]

Read into this muppet. https://en.m.wikipedia.org/wiki/Tommy_Robinson_(activist)

Until a motive is established keep an open mind.

"Wer für alles offen ist, kann nicht ganz dicht sein." - Unkown 

Not sure, how to translate this, since this is some kind of playing with words with their meanings and context.

[Saskia]

if you are open for anything, you have a major leak.

Sorry, my feeble attempt at translating this, hope I preserved the gist ...

[Brumby]

Using Google translate, you get "If you are open to everything, you cannot be completely tight"

This sounds familiar.  I think it's along the lines of: "If you are open to everything, you cannot be certain of anything"

[Saskia]

nicht ganz dicht sein (in German): being crazy, mad, a lunatic, an idiot

[Saskia]

in other news, a cutting plotter has resurfaced and I have even located the software to go with it. Seems that I still need the XP VM 

[bd139]

See now you could buy an old thinkpad to run XP 

Boooooooored. Have tidied everything up, done the shopping and done all the housework. ebay is dead. Everything in the house works. My todo list is empty and I can't be arsed to start any new projects at the moment

[SilverSolder]

if you are open for anything, you have a major leak.

Sorry, my feeble attempt at translating this, hope I preserved the gist ...

I like this version:

"Be careful not to be so open-minded that the contents fall out!"

[Specmaster]

Read into this muppet. https://en.m.wikipedia.org/wiki/Tommy_Robinson_(activist)

Until a motive is established keep an open mind.

"Wer für alles offen ist, kann nicht ganz dicht sein." - Unkown 

Not sure, how to translate this, since this is some kind of playing with words with their meanings and context.

It translates to this
If you are open to everything, you cannot be completely tight.

[Specmaster]

Using Google translate, you get "If you are open to everything, you cannot be completely tight"

This sounds familiar.  I think it's along the lines of: "If you are open to everything, you cannot be certain of anything"

You beat me to it.