EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: sky666 on December 07, 2019, 11:20:41 am

Title: Test leads for rebranded Mastech multimeter
Post by: sky666 on December 07, 2019, 11:20:41 am

Hi,
Does anyone have an idea where I could find test leads for this type of input contacts without  cutting the insulation of test leads?  It's an older multimeter, a rebranded Mastech.  The plastic insulation around the inlet contacts has a diameter of 7mm (0.27 inches), unlike the UNI-T UT61 for example which is about 5mm (0.19 inches).  The diameter of the inner contact is approximately the same.  Contact depth is about 12mm (0.47 inches).