| Products > Test Equipment |
| TH2830 vs TH2832 |
| << < (46/74) > >> |
| nctnico:
I feel an LCR meter upgrade coming up... But I really need a new laptop first >:( |
| Martin72:
My upgrade will take a while, but then I won't need another one: https://www.eevblog.com/forum/repair/hioki-3532-50-lcr-schematic-service-manual-wanted/msg4969691/#msg4969691 |
| KungFuJosh:
--- Quote from: Martin72 on July 19, 2023, 09:32:06 pm ---And then with open/short calibration... ;D --- End quote --- I did the open/short after the patient 30 seconds of waiting. 😉 Here's a warm up time comparison. Open/short correction applied after the specified time. Note: it's a THT fixture, the resistor is a 1% CMF, but it was not in the same position for both tests. For my needs in general, the 30s time is plenty accurate. |
| KungFuJosh:
--- Quote from: Martin72 on July 19, 2023, 09:32:06 pm ---It´s itching in my fingers to take the file and.....No. --- End quote --- When does your calibration expire? 😉 |
| luudee:
--- Quote from: KungFuJosh on July 19, 2023, 10:27:37 pm --- I did the open/short after the patient 30 seconds of waiting. 😉 Here's a warm up time comparison. Open/short correction applied after the specified time. Note: it's a THT fixture, the resistor is a 1% CMF, but it was not in the same position for both tests. For my needs in general, the 30s time is plenty accurate. --- End quote --- Hmm, looks like 200 KHz is still off ... luudee |
| Navigation |
| Message Index |
| Next page |
| Previous page |