Products > Test Equipment

TH2830 vs TH2832

<< < (16/74) > >>

nctnico:
@Josh: you are searching for text but what tv84 has altered is a single byte with the hexadecimal representation of an 8 bit number. 0xC0 = C0 (hex) = 1100000 (binary) = 192 (decimal)

But since you can't load a modified firmware, it looks like there is a checksum that is applied to the firmware chunks (which seems a pretty basic thing to do in order to make sure the firmware file hasn't been corrupted).

KungFuJosh:
Considering that there's no other file, wouldn't the checksum value also need to be supplied by the firmware?

tv84:
Looking at the code, it's easily visible that the "HW Version" is what I called, in my previous call-graph, the "Model Flag".

So your HW Version is 0xA7 which means it's a:

Ax - TH2830 / ST2830 / SM6023 / DHK6100 / JCX860 / TX6100 / TH7830 / TH2816D / OCT1010 / TH2830HY

luudee:

Guys,

sorry, I have been very busy lately with work ...

But I would like to help, I have the TH2832 ...

What do you need ?

Cheers,
luudee

tv84:

--- Quote from: luudee on July 01, 2023, 01:51:16 pm ---What do you need ?

--- End quote ---

Show me your HW version screen. And, if possible, share any FW file you might have updated with.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod