Products > Test Equipment
TH2830 vs TH2832
KungFuJosh:
--- Quote from: tv84 on July 01, 2023, 01:16:12 pm ---Looking at the code, it's easily visible that the "HW Version" is what I called, in my previous call-graph, the "Model Flag".
So your HW Version is 0xA7 which means it's a:
Ax - TH2830 / ST2830 / SM6023 / DHK6100 / JCX860 / TX6100 / TH7830 / TH2816D / OCT1010 / TH2830HY
--- End quote ---
That makes sense. And with @Martin72's being A6, it's the same series. It appears that's the thing we need to figure out how to change.
luudee:
--- Quote from: tv84 on July 01, 2023, 02:10:13 pm ---
Show me your HW version screen. And, if possible, share any FW file you might have updated with.
--- End quote ---
Hi TV84,
I think Josh already posted it, but here it is again.
I don't have any firmware, it's on my to-do list to ping the manufacturer ...
Cheers,
luudee
luudee:
Thanks Josh for pointing out the TRIG setup ...
luudee
KungFuJosh:
--- Quote from: luudee on July 01, 2023, 02:19:11 pm ---I don't have any firmware, it's on my to-do list to ping the manufacturer ...
--- End quote ---
Good luck with that. If they actually have something newer than what you have, and miraculously share it, please share it here too. 😉
KungFuJosh:
--- Quote from: tv84 on July 01, 2023, 02:39:02 pm ---Josh, try this one.
--- End quote ---
Thank you. I tried it, unfortunately it loops between 5 and 10% before failing. That's what usually happens when they fail.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version