Products > Test Equipment
The attempt of a Micsig (A/S)TO11xx general purpose thread ... :-)
<< < (7/20) > >>
Pfriemler:

--- Quote from: Fungus on July 18, 2021, 10:30:05 pm ---They're from the same era...  :-DD

--- End quote ---
Indeed. The HP only looks older.

back to topic: The app is not free, you have to pay before downloading. To work on other devices, it must neither check the Google account offline nor rely on an internet connection to do so. I know of very few apps where this is true. I have installed paid apps on other devices that did not work.
This is why I prefer free apps at all.
Monty:
Purchased Micsig STO1104C.
Now the cursor function is very basic  :--. Micsig must add tracking and automatic cursor function. Even significantly cheaper Rigol has better cursor options.
Monty:
Interesting thing is that you can unlock STO1104C to STO1104E quite easily by using EFT Pro and Samsung ODIN3 tool. At first you must dump oscilloscope ROM to file. Then split ROM to file system Folders and bootloader file, cut spare space and then modify files responsible for S/N number  and model parameters setting. Then you must load back to oscilloscope part of memory with modified model parameters. You can also probably able to add label function, segmented memory option from STO2000 series models, but I never tried this. So I think it does not make sense to pay more for STO1104E model. HW in model C and E is identical. Motherboards in both are the same STO1000_V5X_MB. RAM Memory is 8GB and FPGA RAM is 1GB, so no bad at all. Of course STO2000 HW is different. I think there will be somebody who will make complex tool for hacking/unlocking micsig STO1000 series features similary as with Siglent oscilloscopes.
Monty:

--- Quote from: Fungus on July 17, 2021, 12:18:06 pm ---Extra post for discussion:

My feature requests are:
1) Better text legibility
2) Statistics mode
3) Combine duty cycle into a single value
4) AC RMS
5) FFT improvements
6) More info in CSV files
7) Lock traces

In terms of priority, I think number (2) is the feature most people around here think is "missing" on Micsigs, eg. it came up here today. It's also very easy to implement.

After that, (4) and (5) are what would really raise the profile of the 'scope in these forums. I think I can say that many people here believe that (4) is essential in a scope.

(3) Seems trivial at first but if you implement (4) then you might need two more items in the measurement menu (AC RMS and AC CRMS) and there's only one space at the moment. Combining both pulse width measurements into a single item gives you an extra item.  :)

(7) Is annoying when you're trying to align cursors with the trace and you accidentally move the trace then have to go back and align the cursors again.

--- End quote ---

Definitely agree with you Fungus.

In addition my SW feature requests are:
8 ) Tracking and automatic cursor function like on cheaper Rigol or Siglent,
9) FFT Spectrum of at least of 1Mpts,
10) FFT with visible Grid scale like on Siglent (cheaper!)
11) Averaging function on FFT spectrum - very important function!
12) Separated averaging function setup for every channel,
13) Customizable channel colours and labels.
Wintel:
STO1104C also without segmented memory option, too bad.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod