EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: IngIgn2689 on December 18, 2024, 12:46:19 am
-
Hello team, I open this forum to ask you about a piece of equipment.
I have an industrial electronics repair shop, for VFD, Servodrive, HMI, PLC, etc.
Next year I need to replace some equipment and one of these equipment is the Universal Programmer.
What is the best equipment today in December 2024? In my search I found: Top max 3, Dataman, Galep5, Elnec
Please I need your help and recommendations.
-
I have used LabTool-48XP. The latest LabTool-48UXP can support more chips, but their software is charged. The free one only supports Windows XP system.
-
48UXP if you arent dealing with modern big flash chips,
T56 if you are - but the T56 cant handle all the microcontrollers and PLD's the 48UXP supports.
in short - there is no real "universal" programmer unfortunatly.
-
some does require very expensive adapters elnec and some others, some are pay per programming, xeltec latest programmer 7xxx series
there are somewhat universal ones like tnm7000 cheap adapters pricings ... no absolute
labtool 48 uxp, chipmaster 6000 uxp, minato and many odm ones, "ELNEC is the main maker" beyond v8.32, is by 2 years licence
some say svod (need registration), galep etc ... some can do obscure devices, ecu programation etc ...
yes no absolute programmer, you need to know what you'll need or program BEFORE purchasing one or many ...