Products > Test Equipment

The Siglent SDG1000 and SDG800 thread

<< < (36/81) > >>

Macbeth:

--- Quote from: Lightages on July 06, 2015, 05:40:06 pm ---The 50Mhz model costs so much more than the 25Mhz model in scale compared to the other upgrades. I would guess that there is a difference in hardware for that jump.
--- End quote ---

Don't forget the SDG1050 is only 50MHz on the sine wave function, everything else is the same as the SDG1025, including maximum 25MHz square wave. A square wave is the fundamental sine wave + odd harmonics, the first of which is 75MHz at 1/3rd the amplitude, so I would imagine a 50MHz sine is easily achievable on equipment that can produce  square waves up to 25MHz. A 16.66MHz square wave will be generating a 50MHz sine (+ 83.33, 116.66, etc..)


--- Quote ---I also see empty locations for parts and cable connectors on mine. I wonder what they are for?
--- End quote ---

You know what, I've not even teared it apaaart yet! But I know you can replace the crystal with an OCXO easily enough, space is provided for that. Other headers could be for JTAG and serial. Perhaps they envisaged a LAN/GPIB option board too? or maybe the SA1010 power amplifier add-on was originally intended as an internal upgrade?

rf-loop:

--- Quote from: tautech on July 06, 2015, 07:58:25 am ---
Could it be a new AWG......possibly with BW upgrades.  :-//


--- End quote ---

New AWG is coming but it looks different. Series 2000X (and slso 2000E)
(also coming SDS1000X series oscilloscopes)
I do not have any signs about new AWG what looks 1000 series. (of course it is possible there is coming also something like 1000X but is is just free speculation)

@tautech  Have you noted that new SDG1000 generators serial numbers do not anymore tell model! ?   (model is only hand check on the carton label but serial do not have any sign about model, same in some oscilloscopes...  (perhaps it is sign about something is changing... ;)  )

SDG2000X "TrueArb"

tautech:

--- Quote from: rf-loop on July 06, 2015, 09:39:49 pm ---@tautech  Have you noted that new SDG1000 generators serial numbers do not anymore tell model! ?   (model is only hand check on the carton label but serial do not have any sign about model, same in some oscilloscopes...  (perhaps it is sign about something is changing... ;)  )

--- End quote ---
Not specifically, but I had noticed some letters in SNs that had not been present before.
What they signify I have no idea.  :-//

I'd love it if we could stock less inventory and configure units to customer's requirements but unless someone cracks BW configuration I won't hold my breath waiting for Siglent to allow us do this.

tautech:
Just had notifcation of new FW for the SDG1000 series.

Summary of Changes:
added boot up language selection
added bandwidth update option
fixed the Sweep error

http://siglentamerica.com/download/software/SDG1000-V100R001B01D01P37R3.rar

(811 Kb)

Macbeth:

--- Quote from: tautech on July 08, 2015, 10:06:30 am ---Summary of Changes:
added boot up language selection
added bandwidth update option
fixed the Sweep error

--- End quote ---
They seem to be the changes in the last update... I can confirm this update gets rid of the boot up language  :-+ ... and they haven't removed the bandwidth update option  :-+

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod