Products > Test Equipment
The Siglent SDG1000 and SDG800 thread
rf-loop:
Windows 7 but what version exactly?
Installed Ni-Visa version? 5.1.2 runtime?
P34 Installed "For all users"?
As previously told, also I test it and during installation and use not any kind of problem.
(I have tested it now more). 1. unisntall and clean all old P32, installed P34 = works ok. and now later: unindstalled and removed all P34, installed P32. Works ok. Uninstalled and removed all P32, installed P34, works ok. Uninstalled P34 all.
Uninstalled Ni-Visa. Installed P34 = fails of course due to missing one dll. Removed all P34. Installed Ni-Visa 5.1.2 runtime. (after then reboot) Installed P34. works ok as previously.
So there must be some undefined conflict with some software in Computer (Firewall, or some other running software do conflict?), some win7 version is not fully compatible?
Ni-Visa what I use is exatly this:
http://www.ni.com/download/ni-visa-run-time-engine-5.1.2/2918/en/
billfernandez:
--- Quote from: rf-loop on January 25, 2016, 02:20:36 pm ---Windows 7 but what version exactly?
Installed Ni-Visa version? 5.1.2 runtime?
P34 Installed "For all users"?
--- End quote ---
Windows 7 Pro with service pack 1, 64 bit.
P34 installed for all users.
Not sure how to determine version on NI-Visa (is it needed by EasyWave?), but I have "VISA Shared Components 64-Bit" version 5.5 installed. Is that it? If not, where do I look for this?
Muxr:
I was able to reproduce this issue on the SDG1025 as well.
Top is channel 1, bottom is channel 2. Just changing the frequency of CH2 causes glitches on CH1.
CustomEngineerer:
--- Quote from: billfernandez on January 25, 2016, 10:15:27 pm ---
--- Quote from: rf-loop on January 25, 2016, 02:20:36 pm ---Windows 7 but what version exactly?
Installed Ni-Visa version? 5.1.2 runtime?
P34 Installed "For all users"?
--- End quote ---
Windows 7 Pro with service pack 1, 64 bit.
P34 installed for all users.
Not sure how to determine version on NI-Visa (is it needed by EasyWave?), but I have "VISA Shared Components 64-Bit" version 5.5 installed. Is that it? If not, where do I look for this?
--- End quote ---
I had the same issue with P34 on Windows XP Pro, ended up reinstalling P32.
rf-loop:
--- Quote from: billfernandez on January 25, 2016, 10:15:27 pm ---
--- Quote from: rf-loop on January 25, 2016, 02:20:36 pm ---Windows 7 but what version exactly?
Installed Ni-Visa version? 5.1.2 runtime?
P34 Installed "For all users"?
--- End quote ---
Windows 7 Pro with service pack 1, 64 bit.
P34 installed for all users.
Not sure how to determine version on NI-Visa (is it needed by EasyWave?), but I have "VISA Shared Components 64-Bit" version 5.5 installed. Is that it? If not, where do I look for this?
--- End quote ---
It is poorly described By Siglent.
I do not know what year they get manuals and instructions so that they all are updated and easy available in one place ecatly.
If someone jump just now to train he must be least Sherlock Holmes to solve all things. First need solve where can find information and then also need find this information. After find information need also solve what information is valid and what is obsolete and if obsolete information still have some valid information included. I do not know what versions work with what version etc.
But I know, that combination whhat I use, works.
In history it was also important that Ni-Visa was FIRST installed before Computer even hear anything about Siglent (not Easythisandthat and not connected to USB nevere before etc)
It was, and I follow it still until someone tell exactly I'm wrong or I find my procedure do not anymore work for me):
First install Ni-Visa Runtime (link above but also this,I do not know what other version perhaps works or not but I use this version and it have worked rock solid with Win XP32 to Win 7 64. Normally all people with Windows have also .NET frameworks all in update and if I remember right least 3.5 need be installed)
After Ni-Visa installation (and so that it never have seen any Siglent before or cleaned, what means sometimes more than just unisntall button)
After Ni-Visa need reboot Computer!
After then when all is ok. Then install (with admin rights) Siglent (and I recommend isntall for "all users")
This is first point when it is safe to first connect also USB if want.
I have not any experience with Windows B or 10.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version