EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: jopki on April 26, 2016, 02:36:29 am

Title: .TIQ MDO4104B-6 WLAN captures imported into SignalVu-PC 3.7 - problem no more
Post by: jopki on April 26, 2016, 02:36:29 am

... originally I had a question on what I suspected could be an MDO HW problem but I have figured it out - turned out to be an MDO NEWBIE issue :) Wanted to delete this message but the system did not allow me to. Please disregard. thanks.

Title: Re: .TIQ MDO4104B-6 WLAN captures imported into SignalVu-PC 3.7 - problem no more
Post by: Wuerstchenhund on April 26, 2016, 06:33:02 pm

I think it would have been much better if you just left the original question in place and posted a follow-on reply explaining what the solution was instead. This way it could have helped others who in the future might find themselves in a similar situation.

Oh well...   :(