Products > Test Equipment
TLA7xxx hacks (32M Depth on TLA7AA4CS enabled successful) :)
KK:
Power cycling the instrument and using Powerflex shows no options installed and the fields are all populated again showing 64K memory depth and 100mhz state.
Not surprising, since it appears the password line isn't working yet. Hopefully we can figure out what it wants.
dxl:
Did you try "PitBull5.5.001"?
KK:
--- Quote from: dxl on June 29, 2014, 06:03:15 pm ---My TLA7AA4 wants "PitBull" with upper case "B". Can you check whether that works?
--- End quote ---
I'm doing this on a TLA7N4. But, i also have a TLA7AA4 that I can try it on (of course it has already been "upgraded" with a new flash).
I used "PitBull" with the TLA7N4, still no go-
6/29/2014 11:05 AM 08.499 0.0305s WIN-330I86GF26R SYST:PASS:INST:PASS PitBull5.5.001
Write
6/29/2014 11:05 AM 17.438 0.0108s WIN-330I86GF26R SYST:ERR?
Write
6/29/2014 11:05 AM 17.469 0.0265s TCPIP::192.168.0.144::vxi0,2::INSTR -104,"Data type error; Unrecognized string data; SYST:PASS:INST:PASS P" Read
KK:
--- Quote from: dxl on June 29, 2014, 06:05:10 pm ---Did you try "PitBull5.5.001"?
--- End quote ---
Didn't work on the 7N4 as posted above. Will check my 7AA4 shortly.
Did you ever get it to work with a 7N4 or just the the 7AA4?
When you disassembled the firmware, did you disassemble the firmware file distributed by tektronix or did you have to pull it out of the module itself. Was the PitBull password plain text in the firmware?
dxl:
Data type error; Unrecognized string data - i think youre missing the quotes around the password.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version