Products > Test Equipment
TLA7AA4 P6860 Probe Artwork
<< < (5/5)
nctnico:
I advise against soldering to the probe head. These are ceramic boards and the traces come off very easely.
velik_kazakov:

--- Quote from: nctnico on October 24, 2019, 09:15:56 am ---I advise against soldering to the probe head. These are ceramic boards and the traces come off very easely.

--- End quote ---
I will try to find a elastomer holder, but if I can't I will sacrifice one probe to solder direct to the ceramic board after I solder whole head to PCB to be well fixed.
mbalmer:
Does anyone have a completed board design for one of these adapters?
Mechatrommer:
this i made a while ago, still untested since they are laying around somewhere right now, you can skip the silkscreen if you want, and you can view gvp file with Gerbv 2.5.0. fwiw.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod