Products > Test Equipment
Tonghui TH2830 LRC meter serial port, HOW ? BRAKE THRU, ALIVE
oz2cpu:
Hi martin
I used TERA TERM
with the settings and wirings explained in the last video
i look so much forward to hear if you are smarter than me :-)
please figure out how to read measurement data
so we can make a cool curve tracer with Test Controller..
Martin72:
Well, let´s see...
When I don´t get the chance at work, I´ll "loan" the meter for a weekend (can´t promise the forthcoming weekend) at home. ;)
Not exactly the same, but I have more or less the same problems with my ET4410, you can do some things on the commandline, but the script won´t work as expected.
Martin
oz2cpu:
i think we need to start from the bottom,
understand the command line, document it, share all our findings,
then we have a place to direct other users, and our skilled script helpers,
if we all have a deep understanding of how the commands are truely working towards the instrument,
we have a fair chance creating a cool program / driver
oz2cpu:
>from the manual
>7.1.1 DISPlay subsystem commands
>MEASlay subsystem commands are mainly used to set the display page for the instrument.
>The :DISPlay? Query returns the current page.
DISPlay?
RETURNS ERROR BEEP
display:page?
returns
< MEAS DISPLAY - 1 >
wich is NOT one of the listed posibilities ?? see page 72 manual
DISPlay:PAGE MEASurement
DISP:LINE "Resistor meas"
DISPlay:LINE?
returns
Resistor meas
DISPlay:RFONt?
returns
LARGE
DISPlay:RFONt TINY
set the result size to tiny (but dont change measurement time)
so some of that seems to work
>7.1.2 FREQuency subsystem commands
all the listed examples here, seems to work. as explained erlier
i am still not able to read a single type of measurement
china support really try to help,
when i ask a and ask b, they answer c and d
so i have not learned anything usefull from them yet.
anyone else with more luck ??
BY THE WAY : the instrument dont contain a bullet prof incomming values / range / command handler,
with timeout and all that.
so there are a few ways to freeze it..
play a bit with disp:line and parameters to figure out how to read data via their examples, and you get frozen unit.
power off/on restore normal opperation.
Martin72:
I´ve asked the sourcetronic support, if there is a demo version of their ST4 software avaible, just to play around.
No, only full for nearly 300 bucks.. :P
Nevertheless, our ST2830 is back again, at last.
When I get the chance at work I´ll do some tests, otherwise take it to home like mentioned it before.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version