| Products > Test Equipment |
| TTI BS407 Precision Milli/Micro Ohmmeter-Just bought one used. |
| (1/3) > >> |
| djsb:
Just bought a used (without leads-shout out if you have a spare pair I can buy off you) TTI BS407 Precision Milli/Micro Ohmmeter for £455.00 (over £1K new). https://resources.aimtti.com/datasheets/AIM-BS407_precision_micro-ohmeter_data_sheet-Iss1A.pdf It has 1u Ohm resolution, so should be good enough for basic fault-finding on connectors etc. Does anyone else have one of these? I did have a quick look at a UNI-T UT620B, but it doesn't seem to have the same level of resolution. I wonder how much a set of new leads will cost me? Thanks. P.S Can anyone recommend a basic precision resistance standard I can use to do a sanity/functionality test? Not too expensive, please. Thanks. |
| djsb:
Got a set of these 4 lead Kelvin probes as well from Warwick test supplies. https://warwickts.com/8312/PJP-KITKELVIN-4934HA-Kelvin-Probe-Lead-Set-2m Cost £130 including postage and VAT. I hope they are OK. The instrument is 7 years old and was calibrated about 5 years ago, and the internal batteries are OK according to the seller. Should be arriving this week, so I'll have everything by the end of the week. Might do a quick review on my YouTube channel at some stage. |
| Randy222:
How much current on DUT is needed by that meter to read u-ohm ? There are so many. Not sure which ones are good or not. https://duckduckgo.com/?q=milliohm+meter&iar=images&iax=images&ia=images |
| djsb:
250mA according to the datasheet I provided a link to in my first post. The resolution is 1 micro Ohm on the 1999 micro Ohm range. |
| Randy222:
--- Quote from: djsb on January 08, 2024, 03:31:43 pm ---250mA according to the datasheet I provided a link to in my first post. The resolution is 1 micro Ohm on the 1999 micro Ohm range. --- End quote --- I asked because some of models, like the x-branded Lutron MO-2014 (aka MRC Lab MO-2014) spec sheet calls for 10A in the 0-60k u-ohm range. Where does a small handheld get accurate 10A from? It's internal fuse is a 10A fuse. |
| Navigation |
| Message Index |
| Next page |