EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: hirada on March 08, 2021, 10:20:24 am

Title: u1272a - SCPI command for peak value measurements
Post by: hirada on March 08, 2021, 10:20:24 am

Hello,

as the topic suggests, does anyone, who owns such a DMM, by chance have the proper scpi command to remotely activate and readout the peak values from an AC  or AC+DC measurement? Be it current or voltage, as if the minmax button on the device has been pressed for longer than a second?

For readout via a terminal program such as putty or hyperterm, not the agilent software.

Thanks