Products > Test Equipment
Uni-T UT139c LCD biasing and other mods
<< < (8/10) > >>
nicstoun:
Hi, i  buy  139E but with these hack on FC address to 00 or 1E  blacklight time cant change :( i try everything. Backup eeprom,erase upload with changes. Not way only 15sec.
Any idea why multimer not read changes ?

 
frozenfrogz:
Please re-check what you are doing. If I remenber correctly, byte 0xFB is where to change the power off time.
nicstoun:
No, i talk for blacklight time..
frozenfrogz:
Sorry, misread that on mobile.
Did you read back the value from the EEPROM after programming to check it has been written correctly?
nicstoun:
Yes, all is correct but there on 139E  include another chip not only dmt006.. Not sure if keep some data from eeprom
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod