EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: electronupdate on March 02, 2013, 06:57:57 pm

Title: Uni-t UT203 Clamp Multimeter Teardown
Post by: electronupdate on March 02, 2013, 06:57:57 pm

Bought this multimeter for it's ability to measure higher DC currents.  When I tore it down it was better than  I expected... much better than my previous buy of a no-name "CP-05" which was entirely hand soldered. Not really sure where UNI-T fits in the spectrum of quality, but this one seems better than bottom-of-the-barrel, which suprised me as it was only $35.00.
 
A video of the review at the following link:

UNI-T UT203 Clamp Multimeter Review (https://www.youtube.com/watch?v=96d5-APZhww#ws)

Title: Re: Uni-t UT203 Clamp Multimeter Teardown
Post by: SeanB on March 03, 2013, 10:38:34 am

Very nice, but I would prefer the 204 as it comes with true RMS capability.

Title: Re: Uni-t UT203 Clamp Multimeter Teardown
Post by: Lightages on March 03, 2013, 05:32:31 pm

Of course your needs will determine the model you want! The UT204 has TRMS, but does not have capacitance nor temperature which the UT204A . Who is it that says "horses for courses"?

Title: Re: Uni-t UT203 Clamp Multimeter Teardown
Post by: Mkdsime on February 03, 2019, 08:26:00 pm

Hi i have UT204A clamp meter it fell softly and now when i press the select or rel or hold button it beeps sometimes display goes crazy and shuts down. I have cleaned the connections on the pcb, measured the transistors with diode test directly on the board all 'Y1' SMD transistors have short between 2 pins. What could be the problem if someone knows please help somehow thanks and take care.