| Products > Test Equipment |
| UNI-T UT210E Mini Clamp Size |
| (1/2) > >> |
| anrque:
Hello folks, long time lurker but first time registering and posting. I used search here and the rest of the internet and could not find an answer to my (I hope) simple question. With the UNI-T UT210E which is a "mini" clamp-type meter, is the clamp large enough to use it with an AC line splitter like the one sold by Klein. In photos it would seem likely, but then I see the clamp meter in someone's hand and it is so small, hence my question. I want to purchase a decent quality clamp meter (for cheap) and primary use would be with an AC line splitter. Thanks, everyone. |
| DaneLaw:
I don't know the dimension of the Klein, though I purchased a cheap 8USD line-splitter from China a few years back with 1x and 10x with voltage pinholes (KJ79A sadly not available with EU sockets, only US&AU).. with that unit, I can get my 210E around it. It's a tad under 15mm / squared. and with 210E you have around a 17 to 17.5mm clamp gap, as far as I can tell and the same goes for the clamp hole closed on the narrow part...so a max of around 17mm on the narrow part and a max of 20mm on the wide' seems to be max. is it this Klein-unit you referring to? https://www.kleintools.com/catalog/test-measurement-accessories/line-splitter Look to be normal-size gaps and almost like a rebadge of the CN-unit I got, KJ-79A from Kejie Intruments - as it has that exact same branding indent (for a sticker). --- End quote --- --- End quote --- |
| anrque:
The 2 hole (x1 and x10) Klein splitter is discontinued, but the single hole x10 is available and I can purchase locally at the Orange Big-Box store. https://www.kleintools.com/catalog/test-measurement-accessories/line-splitter-10x For any other clamp meter, I wouldn't even need to ask. It was only after seeing the Uni-T UT210E mini in hand (for scale) that I had to ask. |
| DaneLaw:
Its looks to be the same dimension. I reckon it's a tad under 15mm high and 14.2mm wide, and if that's the case, a Unit-t 210E will work. what price is it being sold at? |
| anrque:
Locally and online for just under $16 American. It seems like a handful of other 2 hole x1/x10 can also be had around this price from Jeff Bezos as well. |
| Navigation |
| Message Index |
| Next page |