EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: gg64 on September 13, 2019, 09:07:37 pm
-
Hi,
I need an LCR meter, I got a tiny budget (30-60eur).
I am expecting to measure inductance between:
150µH to 25mH (see https://www.eevblog.com/forum/repair/needs-some-pieces-of-advice-on-how-to-diagnose-an-electric-fence/50/ (https://www.eevblog.com/forum/repair/needs-some-pieces-of-advice-on-how-to-diagnose-an-electric-fence/50/) )
I will probably get somewhere around .1mH to 30mH.
So after searching I found 2 main contender for my use:
uni-t 603
DM4070
I already got some uni-t clamp meter, It work just fine my use (tractors repairs).
Do you guys have thoughst, I can't make up my mind. Because I like to go with the uni-t but I don't know if I actually need to get the 200µH range with a DM4070.
Thanks.
EDIT: I watched again this YT video https://www.youtube.com/watch?v=Kw-_4jNd0bg (https://www.youtube.com/watch?v=Kw-_4jNd0bg)
It seems to be just fine in the 2mH and below (since it is a 2k points) (for 150µH). It seems I somehow missed it.
Some people are talking about the frequency test of the device, it is adviced by some to get a 100kHz one, I can't get the information for those two.
EDIT2: I just watched this video: https://www.youtube.com/watch?v=vpSHWLkjd44 (https://www.youtube.com/watch?v=vpSHWLkjd44)
I am getting mixed feeling about it.