Products > Test Equipment
UNI-T UT61E Multimeter teardown photos.
Wytnucls:
Check this thread:
https://www.eevblog.com/forum/testgear/uni-t-ut71d-review/msg442169/#msg442169
Didix:
--- Quote from: Wytnucls on January 04, 2015, 05:05:21 pm ---Check this thread:
https://www.eevblog.com/forum/testgear/uni-t-ut71d-review/msg442169/#msg442169
--- End quote ---
Hi Wytnucls
thanx for that hint - very good review!
I have read the whole thread.
I think what you are referring is the sentence
"Multiple meter logging is possible, in two separate windows."
This sounds good news!
However, Thilo reports that it freezes after a couple of minutes.
Did you run it for a longer period of time and were you able to save two sets of data?
What did you do to get it reliably running?
-Didix
Thilo78:
And most important:
When trying, I couldn't get the second meter to appear in that second window...
How did you hook up the USB cables? To individual ports on the laptop, or a hub? (can't recognize that from the pic) :-//
Thilo
Wytnucls:
I have 2 USB cables that came with the 71B and 71D. One is marked USB in white font, the other is also marked USB, but in raised font.
The 61E logging only works with the USB in white font cable. The 61E doesn't log in tandem with any of the 71 meters.
The 71B and 71D can log together easily for as long as required (using their own dedicated software), the 71B using the raised font cable and the 71D the other one.
Both sets of data are saved on 2 separate Excel files.
No hub is used, just any of the 3 USB ports on a Sony VPCZ1, running Windows 7.
Didix:
@Thilo:
Which version of the UT61E software did you try: v2 or v4?
Did you already try DMM (https://www-user.tu-chemnitz.de/~heha/hs/UNI-T/ )?
From the infos on that page it is not clear whether you can log two UT61E or not.
-Didix
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version