UNI-T UTG962E sig gen. Rasping noise at switch on

[807]

 Sig gen noise.mp3 (126.73 kB - downloaded 57 times.)Does anyone else get a rasping noise when switching on their UTG962E? It doesn't do it every time, but around 50% of the time it does. I haven't opened it up, so don't know if it's coming from the piezo buzzer or the relays.

I've attached an audio file.

Sometimes it goes on for longer & sometimes just a few clicks.

[BillyO]

Yikes! 

That sound is not supposed to come from any sort of electronic device.

I would open it up just to see where the noise is coming from.  Don't worry about your warranty.  Since it's a UNI-T you don't really have a warranty.

[coromonadalix]

someking of hissing noise ??   psu section, anything  like switching frequency at startup ??

[807]

Yikes! 

That sound is not supposed to come from any sort of electronic device.

I would open it up just to see where the noise is coming from.  Don't worry about your warranty.  Since it's a UNI-T you don't really have a warranty.

yep. I will open it & try & find where the noise is coming from. Although I'm not sure if I will still be able to fault find it, as the most it goes on for is around 2 seconds. And it doesn't do it every time. 

I was just wondering if anyone else has the same problem. I've seen a few reviews & no one else has mentioned it. 

[807]

someking of hissing noise ??   psu section, anything  like switching frequency at startup ??

It's not a hissing noise, it's a rasping'farting kind of sound that gradually decreases in frequency.

The sig gen uses a seperate power supply that has a USB socket. The cable supplied is a USB to barrel lead.

I suppose it could be the PSU. I could try a different power supply for a few days to see how it goes.