Products > Test Equipment

Upcoming Rigol DSG815/830

<< < (13/18) > >>

Darius121:

--- Quote from: Darius121 on October 29, 2021, 07:17:38 am ---Currently running 'break' on the public key but no idea how long it will take.

--- End quote ---

Turns out it seems to be broken on Linux and OSX but runs OK on Windows (last 4 digits are 23EF), although the resulting key does not produce something my sig gen likes.

AlexDavidson:

--- Quote ---Turns out it seems to be broken on Linux and OSX but runs OK on Windows (last 4 digits are 23EF), although the resulting key does not produce something my sig gen likes.
--- End quote ---

Not just broken on Linux & OSX, but Windows too. After waiting a week for a result from rigup-0.4.2-x86_64-win.exe break 6673BBC777EA4D, I gave up and tried running it on another machine. Instant success. 3521E2B968D60F.

Darius121:

--- Quote from: AlexDavidson on November 06, 2021, 12:56:20 am ---Not just broken on Linux & OSX, but Windows too. After waiting a week for a result from rigup-0.4.2-x86_64-win.exe break 6673BBC777EA4D, I gave up and tried running it on another machine. Instant success. 3521E2B968D60F.

--- End quote ---

Hah thanks!
I did find on some systems it will run and finish straight away but give you a different result each time which is obviously broken.

I also note you have to remove the -'s from the key before it will be accepted.

Houseman:

--- Quote from: tv84 on August 03, 2020, 08:13:48 am ---How to license DSG815/830 options

Insert the following parameters in the usual license generator :

Forever Options:
AAAB  (0x00400) - DSG800-PUM Pulse Modulation & Pulse Generator
AAAC  (0x00800) - DSG800-PUG Pulse Train Generator

Public Key:
6673BBC777EA4D  (Key taken from the current FW. Those interested will have to calculate the Private Key as homework.)  ;)

As always, insert the licenses with SCPI command :SYSTem:LKEY.

--- End quote ---
Hi TV84
Seems for my Rigol DSG815 with FW 00.01.07 does not work this method.
Generated lics starts with RAJ9JBB are invalid.
Trial installed are LS9FBxxxxx
Any help?
Best regards

Houseman:

--- Quote from: chicken on August 02, 2020, 09:48:13 pm ---Here's how to enter FACTORY and MANAGER/REPAIR modes:

Prepare a USB stick:
1. Format as FAT32
3. Write the following string to disc sector 3 of the USB stick (I used HxD):
35O8O228OLO8LNMN9690217963MN2O9ON46O9P05975K0047

Plug USB stick into the RF generator

Now the following SCPI commands will work:
:PRIV:SOFT:MODE 0,FACTORYMODEENTRANCE
:PRIV:SOFT:MODE 0,REPAIRMODEENTRANCE
:PRIV:SOFT:MODE 0,MANAGERMODEENTRANCE

The first parameter (0) seems to be ignored.
MANAGER and REPAIR seem to be identical, but entering REPAIR doesn't require the USB stick.

The current mode can be verified with:
:PRIV:SOFT:MODE?

To return to USER mode, power cycle the device or use
:PRIV:SOFT:MODE 0,USERMODEENTRANCE
or
:PRIV:SOFT:MODE 0,EXITCURRENTMODE

Additional menus show up when in FACTORY/REPAIR/MANAGER mode:
Syst > Service
Syst > Service > Calibration
Syst > Service > RF DataSyn
Syst > License > Delete

I haven't dared to mess with settings in factory mode yet (like changing the model to DSG830). Don't blame me if you break your RF generator  :-BROKE

And a little mystery: When triggering the check of the disk sector, an empty file with the name "LqepdclquJ.txt" is created on the USB stick.

--- End quote ---

Hi.
Brand new DSG800.
Having problems with SCPI commands.
Resulting timeout error:
 * Error!!!
VISA:  (Hex 0xBFFF0015) Timeout expired before operation completed.

Some command accepted without error like IDN? or TIME, DATE ecc.
Other are partially accepted like:
:PRIV:SOFT:MODE 0,REPAIRMODEENTRANCE
Still gives me error timeout but
:PRIV:SOFT:MODE? gives me the change from USER to REPAIR MODE
but other complex one like dump or FACTORYMODEENTRANCE or serial license install mode gives me error.
Have reinstalled VISA driver, tried different OS (Mac, windows) different programs (nc, ultrasigma, Bildschirmkopie), tried append /n /r /r/n /n/r command extended timeout without effort.
Any info that Rigol stopped SCPI advanced access or is it only my fault?
Any help?
Thanks all

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod