Products > Test Equipment
Upgrading Mainboard in Lecroy DDA-3000 (aka WavePro 7300a?)
analogRF:
--- Quote from: sixtimesseven on December 17, 2019, 12:24:23 pm ---I found those Kingston sticks KTH-D530/1G but the bios won't even show up |O Burried in the Kingston site it says "system specific", great :palm:
Now, what does work and what 1GB memory modules did you use?
--- End quote ---
I used both samsung and micron and both worked. there was a list of tested memroies on the intel website for this motherboard, not sure if it still exists. Also winXP will only recognize 3.5GB of it (I put 4GB in)
sixtimesseven:
--- Quote from: analogRF on December 17, 2019, 12:27:40 pm ---
--- Quote from: sixtimesseven on December 17, 2019, 12:24:23 pm ---I found those Kingston sticks KTH-D530/1G but the bios won't even show up |O Burried in the Kingston site it says "system specific", great :palm:
Now, what does work and what 1GB memory modules did you use?
--- End quote ---
I used both samsung and micron and both worked. there was a list of tested memroies on the intel website for this motherboard, not sure if it still exists. Also winXP will only recognize 3.5GB of it (I put 4GB in)
--- End quote ---
Yes, I'll waste some ram but I want dual channel...
There is a compability list: https://www.intel.com/content/www/us/en/support/articles/000006686/boards-and-kits/desktop-boards.html
However, all are <=512Mb :-//
analogRF:
yes but they give you the memory configuration that 1GB stick must have. Also if you for example look at the 512MB micron MT16VDDT6464AG datasheet you will also see 1GB and 2GB memories of the same family in that datasheet. I chose the 1GB from the same family that its 512MB was compatible.
nctnico:
--- Quote from: sixtimesseven on December 17, 2019, 12:24:23 pm ---I found those Kingston sticks KTH-D530/1G but the bios won't even show up |O Burried in the Kingston site it says "system specific", great :palm:
Now, what does work and what 1GB memory modules did you use?
--- End quote ---
You have to update the BIOS to the latest version. With the original BIOS the 1GB modules I used wheren't recognised. BTW: I bought this Kingston module: KVR400X64C3A/1G. There is a more up-to-date compatibility list somewhere.
sixtimesseven:
--- Quote from: nctnico on December 17, 2019, 01:10:00 pm ---
--- Quote from: sixtimesseven on December 17, 2019, 12:24:23 pm ---I found those Kingston sticks KTH-D530/1G but the bios won't even show up |O Burried in the Kingston site it says "system specific", great :palm:
Now, what does work and what 1GB memory modules did you use?
--- End quote ---
You have to update the BIOS to the latest version. With the original BIOS the 1GB modules I used wheren't recognised. BTW: I bought this Kingston module: KVR400X64C3A/1G. There is a more up-to-date compatibility list somewhere.
--- End quote ---
Well good idea. I updated from P16 to P25, still no luck. As soon as I put one stick in nothing will come up, not even the lecroy logo. Well, time to buy another 1$ ram stick :-DD
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version