Products > Test Equipment

Upgrading Mainboard in Lecroy DDA-3000 (aka WavePro 7300a?)

<< < (133/155) > >>

Converter:

--- Quote from: lzqing on April 03, 2020, 03:24:59 pm ---You are right ! Keep 865G chipset since it is last one support DVO via AGP bus, that mean you can keep all the card include LCD and Touchpanel . 775 version support dual core CPU also good for this scope.

Best regards
Andy.Lu

--- End quote ---
Just for reference - the i915 chipset is the last, which supports AGP.  But I do not see the point of why you should strive for AGP. You just need to add any hardware to get the video output of the lvds (or parallel ttl for the old 800x600 display).

A good example for replacing a motherboard I mentioned:  HERE
This is an AIMB-582QG2 motherboard that already contains integrated PCI, LVDS and DP ports.

jemangedeslolos:
Hello :)

I just came across your talks and it's very interesting!
At what price did you manage to buy your used models ?

analogRF:

--- Quote from: Converter on April 03, 2020, 06:45:05 pm ---
--- Quote from: lzqing on April 03, 2020, 03:24:59 pm ---You are right ! Keep 865G chipset since it is last one support DVO via AGP bus, that mean you can keep all the card include LCD and Touchpanel . 775 version support dual core CPU also good for this scope.

Best regards
Andy.Lu

--- End quote ---
Just for reference - the i915 chipset is the last, which supports AGP.  But I do not see the point of why you should strive for AGP. You just need to add any hardware to get the video output of the lvds (or parallel ttl for the old 800x600 display).

A good example for replacing a motherboard I mentioned:  HERE
This is an AIMB-582QG2 motherboard that already contains integrated PCI, LVDS and DP ports.

--- End quote ---

well, try to find that motherboard on ebay today  :o
but let's say some time in future I get lucky and I can find that motherboard cheap, can you please tell me exactly what other hardware I will need if I want to keep the original LCD (i dont like ipad lcd or any hd quality because I wont be able to see/read the screen. even at 800x600 I have problem)

my second question is, what will be the software installation procedure? is this correct: (1) install winxp (with multiprocessor HAL) (2) install Lecroy drivers and touchpad driver (which ones?) (3) install latest XStream software (4) workaround for front panel LED flashing

thanks

Converter:
The native LCD matrix NL8060BC26-17 has an parallel ttl-interface 1 ch, 6-bit, 41 pins Connector DF9-41. You just need to use the scaler module, which is compatible with it and which you will connect to the output of the GPU (built-in MB, or a separate discrete one). Either use a discrete graphics processor with an integrated 6-bit ttl port to connect your matrix, or use a motherboard with an integrated 6-bit ttl port to directly connect your matrix.

lzqing:
 :'(  I get problem with P5PE-VM mobo , the OS will hang on power off  screen, I tried both XP and Win7 ,and reboot is function properly, Anybody has same problem here ?  Maybe ACPI drivers was problem or mobo had hardware issue .

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod