Author Topic: Help identifying this logic analyzer(?) harness?  (Read 148 times)

0 Members and 1 Guest are viewing this topic.

Offline nsd_c

  • Contributor
  • Posts: 31
Help identifying this logic analyzer(?) harness?
« on: September 24, 2019, 05:44:02 am »
Hi all,

I picked up a set of old-school Tektronix logic probe clips (P/N 206-0222-00) and a harness that was with them from an estate sale. I was able to figure out the part number of the Tektronix probe clips by looking in scans of old Tek catalogs on the Internet Archive.

But, I can't seem to figure out what the harness is and what it goes to. It has 11 wires instead of 10 as used with the P64xx series of logic probes. Also, the header connector is quite odd--it's curved and thicker to the rear, which I have never seen before.

Does anyone recognize what this goes to?

Thanks.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf