| Products > Test Equipment |
| User feedback on KC901S+ and KC901V handheld network analysers |
| << < (3/4) > >> |
| dk5ya:
--- Quote from: RFDUK on March 05, 2018, 01:07:46 pm ---The review by Shahriar observed LO PLL instability at higher frequencies. Does anyone know if that was resolved by Deepace? --- End quote --- I have never been able to determine that yet. Also on the analyzer (Siglent 3032X) I could not detect any problems with the LO. But I measure regularly only up to about 2 GHz. Its a KC901S+, bought back in October last year. Udo |
| Wirehead:
--- Quote from: dk5ya on March 23, 2018, 10:03:43 pm --- --- Quote from: RFDUK on March 05, 2018, 01:07:46 pm ---The review by Shahriar observed LO PLL instability at higher frequencies. Does anyone know if that was resolved by Deepace? --- End quote --- I have never been able to determine that yet. Also on the analyzer (Siglent 3032X) I could not detect any problems with the LO. But I measure regularly only up to about 2 GHz. Its a KC901S+, bought back in October last year. Udo --- End quote --- Where did you buy it in Europe - trying to avoid any extra customs fees.. What's your opinion / experience on the device up to now? I'm also looking at the 901S+. Have you used it in the HF part as well? |
| dk5ya:
@Wirehead: you have mail. |
| Wirehead:
--- Quote from: dk5ya on April 18, 2018, 08:46:10 am ---@Wirehead: you have mail. --- End quote --- Thanks Udo - appreciate it! :-+ |
| Ivan7enych:
Hello, I've got the KC901V several month ago (mainly because of Signal Path review). For me it works best in S11 measurements, I can test both 2.4GHz antennas and 5GHz (for FPV copters). S21 accuracy is limited by 2 things - 1. poor 50ohm matching of output and input ports, this can be improved a bit by 3-6 dB attenuators at output port. 2. internal leakage between ports on frequencies (> 3-4GHz) |
| Navigation |
| Message Index |
| Next page |
| Previous page |