Products > Test Equipment
Modifying T12-952 soldering station for driving 2 tips
<< < (5/7) > >>
JCOS1:

--- Quote from: tooki on March 10, 2022, 07:06:13 pm ---
--- Quote from: JCOS1 on March 05, 2022, 03:33:00 am ---I did it differently, I used the gordak 902 handle and a separate controller.
I used 2 JL02 tips, the controller is next to the articulated handle.
How do I upload a photo from my desktop?.

--- End quote ---
When you post or reply, click “Attachments and other options” below the text box.

--- End quote ---

Thanks
Attachments
JCOS1:
Also transforms into soldering iron in two ways
Was it good?.
It took a lot of work.
cosmin 1, how did you do it?. I'm looking for an easier way to do it, yours seems to allow the use of almost all types of tips.
JCOS1:
More news.
Portable Ts 80 controller.
I have a lot of other news
JCOS1:
Those were the first ones that gave the ideas for t12.
  Gordak 902 Hinged Handle, A1322 specific heating element for use on atten 936b.
The other ugly is micro controlled, using selected A1322 heating element
cosmin1:

--- Quote from: JCOS1 on March 11, 2022, 12:28:33 am ---Also transforms into soldering iron in two ways
Was it good?.
It took a lot of work.
cosmin 1, how did you do it?. I'm looking for an easier way to do it, yours seems to allow the use of almost all types of tips.

--- End quote ---
I molded the entire tweezer housing from high temperature ABS, inserted the contacts and copper rings to hold tips in propper position. It wasn't an easy job. It took me several weeks of work but it's somthing you can't buy.

I have those tweezers you used, too. But i connect them to a classic soldering station in case something happens to this.
In same way i built a 5V tweezers, adjustable power, works great on small jobs. It's not finished, but it's in fully working condition.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod