Products > Test Equipment
Modifying T12-952 soldering station for driving 2 tips
<< < (7/7)
JCOS1:
Same as this.

f1ght3r:
So the easiest way is to put a controler between the t12 station and the 2 tips which would read the temperature for each one and "direct" the power acordingly, however what temp would it report back to the station? I think it might be easier to do a separate "station" to deal with the tweezers.  I'm kinda curious now to find out how Hakko or JBC does it, cause as far as i know the tweezer works on "normal" station, so either they have made all stations with 2 temp circuts controllers inside or they add some kind of controller on the tweezer side, which might sound easier but i'm not sure how well that works in keeping things calibrated and such.
JCOS1:
Where can I find this terminal to buy?.
It is plug into Chinese JBC 245 PCB Handskit
Dimensions: 3mm x 3.7mm x 6mm
f1ght3r:

Quote from: JCOS1 on Today at 01:14:40 am
Where can I find this terminal to buy?.
It is plug into Chinese JBC 245 PCB Handskit
Dimensions: 3mm x 3.7mm x 6mm

--- End quote ---


Look for DIY handle kits on aliexpress or similar sites.
i found one but comes with all the handle parts https://aliexpress.com/item/1005004019617707.html?item_id=1005004019617707&sku_id=12000027759951136&spm=a2g2w.productlist.0.0.4eeb46d4A3zYh9
If not you could try to see which bullet female connector fits though it might need some modification to make sure it doesn't damage the tips when you change them.
JCOS1:
Chinese novelty.
https://pt.aliexpress.com/item/1005004913385606.html?spm=a2g0o.detail.1000014.5.472f7d45khzluP&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40000.267768.0&scm_id=1007.40000.267768.0&scm-url=1007.40000.267768.0&pvid=0991dd2f-7749-4254-94cf-3a1a806c83d1&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40000.267768.0,pvid:0991dd2f-7749-4254-94cf-3a1a806c83d1,tpp_buckets:668%232846%238116%23958&pdp_ext_f=%7B%22sku_id%22%3A%2212000030998514866%22%2C%22sceneId%22%3A%2230050%22%7D&pdp_npi=2%40dis%21BRL%21572.89%21320.84%21%21%21%21%21%40210323a716694756962452527e1aa9%2112000030998514866%21rec&ad_pvid=202211260714562671767951803627158777_0
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod