EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: jucole on October 25, 2013, 10:49:05 am

Title: UT70B PCB Photo
Post by: jucole on October 25, 2013, 10:49:05 am
I've had my UT70B in bits for the last week or so while I try and learn more about the parts and how it works;  so I thought I'd share a nice pic of the board if anyone is interested.

(http://1.bp.blogspot.com/-LTmOg_IQqRA/UmmIdA0PPiI/AAAAAAAABnw/kxQtMvF49lI/s1600/DSC02856_small.jpg)
Title: Re: UT70B PCB Photo
Post by: Hydrawerk on May 11, 2016, 07:11:22 am
At least there are some MOVs and PTCs present. Even a sparkgap.
The voltage jack is well protected. But for fuse replacement you must open the DMM and remove the next 4 screws on the input jacks. That is crap. And the fuses are only 250V rated.  :--
Title: Re: UT70B PCB Photo
Post by: Hydrawerk on May 11, 2016, 07:45:29 am
I found some photos here. https://picasaweb.google.com/104378593109746079667/UT70B I am not an author of these photos. They were made by David Cada in May 2011.
Title: Re: UT70B PCB Photo
Post by: Hydrawerk on May 11, 2016, 07:47:39 am
Another photo.
Title: Re: UT70B PCB Photo
Post by: Hydrawerk on May 11, 2016, 07:58:38 am
http://mrmodemhead.com/blog/gallery/uni-t-ut70b-dmm/ (http://mrmodemhead.com/blog/gallery/uni-t-ut70b-dmm/)