| Products > Test Equipment |
| Video Teardown, Analysis and Repair of an Agilent E4407B ESA-E Spectrum Analyzer |
| (1/9) > >> |
| Hugoneus:
In this episode Shahriar takes a detailed look at an Agilent (Keysight) E4407B ESA-E Spectrum Analyzer. The instruments reports an “Unlock LO” error message which prevents internal alignments from being performed. Before the repair process can begin, the firmware of the instrument must be updated. The firmware upgrade requires the installation of additional flash memory ICs which is presented in the video. The main processor board with its various components are also described in the video. The complete block diagram of the spectrum analyzer is presented with a detailed look at the principle of operation of the instrument. All the main functional blocks such as the YIG Oscillator, Phase Detector, LO Path, LO Amplifier, Charge Pump, Pre-tune segments, digital circuits, IF and LO paths are analyzed both in schematic and on the PCB. Several potential faults are investigated and measured. Watch here: [2 Hours] http://youtu.be/gb1QMJtwumQ More videos at The Signal Path: http://www.TheSignalPath.com |
| kg4arn:
Really enjoyed the extra detail and explanation. Thanks |
| Hugoneus:
--- Quote from: kg4arn on October 02, 2014, 09:01:49 pm ---Really enjoyed the extra detail and explanation. Thanks --- End quote --- Great. Glad to hear it. |
| Wytnucls:
Shahriar, the Steven Spielberg of electronics videos... ;) Fantastic, keep them coming. |
| poida_pie:
Yet another excellent video. I liked the sigma-delta A-D one as well. I particularly enjoy the repair type videos you do. |
| Navigation |
| Message Index |
| Next page |