Products > Test Equipment

VXI11/LXI

<< < (3/4) > >>

davorin:
Interesting...nmap doesn't show port 5024, but indeed I can telnet to it (o;


--- Code: ---klingler@Mac-Studio-2 ~ % nmap 10.0.110.1
Starting Nmap 7.95 ( https://nmap.org ) at 2024-12-14 13:18 CET
Nmap scan report for 10.0.110.1
Host is up (0.00052s latency).
Not shown: 997 closed tcp ports (conn-refused)
PORT     STATE SERVICE
80/tcp   open  http
111/tcp  open  rpcbind
5900/tcp open  vnc

--- End code ---

--- Code: ---Nmap done: 1 IP address (1 host up) scanned in 0.52 seconds
klingler@Mac-Studio-2 ~ % telnet 10.0.110.1 5024
Trying 10.0.110.1...
Connected to 10.0.110.1.
Escape character is '^]'.
Welcome to the SCPI instrument 'Siglent SSA3032X Plus'
>>*IDN?
Siglent Technologies,SSA3032X Plus,SSA3PD1R378378,3.2.2.6.0R10

--- End code ---

tautech:

--- Quote from: tautech on December 13, 2024, 09:29:24 pm ---
--- Quote from: davorin on December 13, 2024, 09:14:16 pm ---Well web page I know of…but I want to directly communicate with it via TCP socket from my own macOS software (o;

--- End quote ---
IP plus port 5024 5025 IIRC.
RTFM.  ;)

--- End quote ---
Sorry, 5025 is the coms port.  :-[

See P5
https://www.siglenteu.com/wp-content/uploads/dlm_uploads/2019/09/ProgrammingGuide_PG0703P_E02B.pdf

RoGeorge:

--- Quote from: davorin on December 14, 2024, 12:18:49 pm ---indeed I can telnet to it (o;

--- End quote ---

 :-+

As for Python, I remember now that the VXI library (initially a project by Alex Forencich) was in a limbo state some years ago, with about 100+ forks on github.

I'm not using that anymore, but use pyvisa instead.
https://github.com/pyvisa/pyvisa
https://pyvisa.readthedocs.io/en/latest/

For Mac it might also work the liblxy library, but I don't have a Mac either (though it works for BSD based OSs, too).  The author use to announce here, on EEVblog, when major features are added.  liblxi is now in the official repos of RedHat/Ubuntu, etc.  It's written in C, and has a Python wrapper, too.
https://github.com/lxi-tools/liblxi

tautech:
https://www.eevblog.com/forum/testgear/open-source-lxi-tools-v2-0-released/

TheoB:

--- Quote from: RoGeorge on December 14, 2024, 12:37:13 pm ---As for Python, I remember now that the VXI library (initially a project by Alex Forencich) was in a limbo state some years ago, with about 100+ forks on github.

I'm not using that anymore, but use pyvisa instead.
https://github.com/pyvisa/pyvisa
https://pyvisa.readthedocs.io/en/latest/

For Mac it might also work the liblxy library, but I don't have a Mac either (though it works for BSD based OSs, too).  The author use to announce here, on EEVblog, when major features are added.  liblxi is now in the official repos of RedHat/Ubuntu, etc.  It's written in C, and has a Python wrapper, too.
https://github.com/lxi-tools/liblxi

--- End quote ---
Exact. I also use pyvisa. It works fine and has documentation.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod