| Products > Test Equipment |
| Wandel & Goltermann NOWA-1,power line harmonic analyzer |
| << < (4/6) > >> |
| Mashpriborintorg:
--- Quote ---My SF-60 only have one of four signal outputs populated. The one from Ebay hav all Signal outputs, but no optical interface. On the picture you can see my version/options. By the way, I love the little tool box at the back :D --- End quote --- There is no optical interface, but the "Laser on" led is lit up.... maybe there are optical connectors on the rear panel ? I'll see, hopefully it will arrive next week. |
| dom0:
Uhm, are there any practical measurements you can do with a SDH analyzer like this ... outside SDH networks? @IMG_6849.JPG : quite an EPROM "chipset" :-) |
| Mashpriborintorg:
Well the seller was incredibly fast, the SF60 is here already :-+ As expected: The board with fiber optics stuff is not populated, I have an empty slot with unconnected cables ziptied all around. Goods news: the LCD is finally working, the boot hangs onto a "RAM/ low battery / data loss failure" :-BROKE I hope there's a back-up battery somewhere that needs to be replaced to fix the problem ! :-/O My version is BN 3017/01, no options. Serial number on the front panel is U0009. |
| Mashpriborintorg:
Guess what... batteries replaced, the beast boots ! O0 :clap: Update: auto-test passed ok ! |
| ming:
--- Quote from: 128er on April 20, 2014, 09:36:57 pm ---Today from Ebay . . . With user manual, remote controll manual and 4 roll of paper for the printer. Not exactly the right thing for some electronic-smd-guys. Maybe someone is interested. I have fun to play around with it :D Round about from 1988. Fully functional and precise. And from W&G you can expect a high build quality. Only the printer jammed. Has two outputs (Volts & Amps) on the rear for an oscilloscope. Direct current measurements up to 30A, voltage up to 500V. Comes with a 1000/1 A current clamp. Measures up to the 50th harmonic. 1st picture: DUT is a vacuum cleaner at full power. ~6.05A at 225V 2nd picture: Harmonics in % of the fundamental (50 Hz). Cursor is at 50 Hz. 3rd picture: DUT at ~40% power 4th picture: Overview of effective, reactive and apparent power That was only a quick play around. Have to read the friendly manual :) --- End quote --- Hello, Can you please have a copy of these manuals, i tried to looking for many years. Your help would be appreciated. |
| Navigation |
| Message Index |
| Next page |
| Previous page |