Author Topic: WaveTek 2002A Parts Needed  (Read 1111 times)

0 Members and 1 Guest are viewing this topic.

Offline George_Race

  • Regular Contributor
  • *
  • Posts: 128
  • Country: us
    • Race Consulting
WaveTek 2002A Parts Needed
« on: May 02, 2015, 08:50:50 pm »
Does anyone know of a source for parts for the WaveTek 2002A Sweep Generator.
I need replacement Drive Pinion, Idler, and Tape Drive Socket Gears for both the Center Frequency and Sweep Width controls.
If anyone has a junk one with good gears that would great to get for repair parts.
Picture of broken gear train assembly attached.

Thanks,
George
 

Offline radhaz

  • Regular Contributor
  • *
  • Posts: 212
  • Country: us
Re: WaveTek 2002A Parts Needed
« Reply #1 on: May 02, 2015, 09:07:53 pm »
You might find suitable gears here:
http://www.sdp-si.com/eStore/CoverPg/Gears.htm
The tape drive looks like a candidate for 3D printing.
 

Offline George_Race

  • Regular Contributor
  • *
  • Posts: 128
  • Country: us
    • Race Consulting
Re: WaveTek 2002A Parts Needed
« Reply #2 on: May 03, 2015, 12:39:47 am »
You are right, would be really neat to have a 3D printer and be able to replace the three gears!
Tried the web page link, it will not come up, says it cannot be found.

Please check and see if there is a mistake in what you sent.
Thanks,
George
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf