| Products > Test Equipment |
| Which HDMI Microscope Camera and Zoom Lens for soldering |
| << < (4/11) > >> |
| Kjelt:
Follow mode |
| EvgenyG:
--- Quote from: pcprogrammer on August 29, 2024, 06:39:43 pm ---I feel that it will improve soldering a lot for me due to being able to sit up straight and look at the monitor instead of the PCB and still maneuver easily with the soldering iron. --- End quote --- It will save your eyes, back and neck, too. You will also easily see any small defects that you won't normally see. The other fact: an average/okay looking job under magnification will look great without it. |
| Kjelt:
Also interested in purchasing a unit but what is up with that magnification? 200x? Then you can only see a single 0603 resistor. With my stereoscope I work mainly with 3x-10x magnification. My guess is that those numbers are not the same unit. Can someone please take and show a picture of a board with their 200x unit ? |
| Phil1977:
--- Quote from: Kjelt on August 30, 2024, 05:43:51 am ---Also interested in purchasing a unit but what is up with that magnification? 200x? Then you can only see a single 0603 resistor. With my stereoscope I work mainly with 3x-10x magnification. My guess is that those numbers are not the same unit. Can someone please take and show a picture of a board with their 200x unit ? --- End quote --- Magnifications are phantasy numbers and absolutely not comparable to classic optical microscopes our loupes. Look for the specified field of view (FOV) or image area. These numbers usually are correct. |
| pcprogrammer:
--- Quote from: EvgenyG on August 30, 2024, 04:07:06 am --- --- Quote from: pcprogrammer on August 29, 2024, 06:39:43 pm ---I feel that it will improve soldering a lot for me due to being able to sit up straight and look at the monitor instead of the PCB and still maneuver easily with the soldering iron. --- End quote --- It will save your eyes, back and neck, too. You will also easily see any small defects that you won't normally see. The other fact: an average/okay looking job under magnification will look great without it. --- End quote --- That is what I implied with sitting up straight. :) I used to do it with a smaller camera with build in 7 inch display but that still required bending down a bit causing back and neck pains. Having Fibromyalgia does not help with that either. :( --- Quote from: Kjelt on August 30, 2024, 05:43:51 am ---Also interested in purchasing a unit but what is up with that magnification? 200x? Then you can only see a single 0603 resistor. With my stereoscope I work mainly with 3x-10x magnification. My guess is that those numbers are not the same unit. Can someone please take and show a picture of a board with their 200x unit ? --- End quote --- The one I received has a 1x - 150x lens, but it depends on the height of the camera what the magnification can be, this due to focus. I will take some pictures later today and post them here. |
| Navigation |
| Message Index |
| Next page |
| Previous page |