Products > Test Equipment
Why some brands don't do LCR meters?
Martin72:
That can only speak for Tonghui in terms of quality.
MathWizard:
You know how there's the FY6900 100MHz Signal generator, it's even in a case like big name versions.
Does any body make cheap LCR or Impedance analyzer versions up to even 50MHz, that are in a box, and are not $20 ebay sig gen or LCR tester quality, but upto the FY6900 level ?
For hobby RF projects, I would want to test a part, at the intended frequency, or close to it, quicker than using a scope and AWG, etc. Or sweep the frequency too and get a plot of something, and even upload it to PC.
Kosmic:
--- Quote from: MathWizard on December 02, 2023, 11:57:52 pm ---Does any body make cheap LCR or Impedance analyzer versions up to even 50MHz, that are in a box, and are not $20 ebay sig gen or LCR tester quality, but upto the FY6900 level ?
--- End quote ---
The NanoVNA ? LCR meters rarely exceed 1Mhz. Normally with higher frequencies, people switch to a VNA.
MathWizard:
I have my eye on them too, I wish they were in a box. So they are a VNA, I have to research all this more because I can't remember if the NanoVNA needs an external signal source, or if it makes it's own. I'm pretty sure good SA's and VNA's have a good SG inside too.
I better look up Impedance analyzer's for sale and read their spec's, see what they do.
As a bench LCR meter, I wonder if something like this really has the mili-ohm spec's listed. I'd like something like these too, IF you could set the frequency to anything you wanted up to the max 100kHz. But yeah I want upto AM radio range at least.
https://www.banggood.com/Mustool-ET4410-Series-Desktop-Digital-LCR-Meter-Capacitance-Resistance-Impedance-Inductance-Measure-LCR-Bridge-LCR-Meter-p-1984698.html?utm_source=googleshopping&utm_medium=cpc_organic&gmcCountry=CA&utm_content=minha&utm_campaign=aceng-pmax-ca-en-pc¤cy=CAD&cur_warehouse=CN&createTmp=1&utm_source=googleshopping&utm_medium=cpc_all&utm_content=nolan&utm_campaign=nolan-aceng-pmax-ca-all-230818&ad_id=&gclid=EAIaIQobChMI6_ve3f7xggMVmOnICh08MgK0EAQYBCABEgIQAfD_BwE
Kosmic:
--- Quote from: MathWizard on December 03, 2023, 12:14:57 am ---I have my eye on them too, I wish they were in a box. So they are a VNA, I have to research all this more because I can't remember if the NanoVNA needs an external signal source, or if it makes it's own.
I better look up Impedance analyzer's for sale and read their spec's, see what they do.
--- End quote ---
No, it's self contain. You can even get one of those cheap adapter board to quickly put different components in different configurations.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version