| Products > Test Equipment |
| Sencore LC102 & LC103 Capacitor & Inductor Analyzer |
| << < (6/20) > >> |
| coromonadalix:
Managed to get the Sencore IB78 RS232 interface for a premium price Gonna try to make a schematic for it, the eeproms dump now exists, will compare to mine when i'll have it ... A member here pigrew is trying to simplify the design for his usage, dont know if it'l get public I'll try to do the same on slightly older tech ?? 5v i/o fpga / cpld ... but i'm rusty Tested my lc102 so far, i had the supply cord from an leader ac xformer, made a new dc supply for it, works fine, lc102 seems pretty spot on, cant find any calibration service near me to do a cal of this unit ??? |
| HighVoltage:
--- Quote from: mr.fabe on August 18, 2019, 02:11:28 pm --- You should probably ask the sysop move this topic to test equipment or start a fresh thread.... --- End quote --- Requested, may be an admin will notice. |
| mr.fabe:
--- Quote from: coromonadalix on August 18, 2019, 03:36:12 pm ---Tested my lc102 so far, i had the supply cord from an leader ac xformer, made a new dc supply for it, works fine, lc102 seems pretty spot on, cant find any calibration service near me to do a cal of this unit ??? --- End quote --- If the readings are pretty close, I wouldn't adjust it unless you absolutely have to. You have a LC102 and can perform the calibration yourself since the unit has variable pots. Much similar to the LC53, LC75, LC101 type units. I wish the LC103 had that option since calibration was quoted at $500-$600 USD. Pretty ridiculous pricing for a non-Lab type piece of equipment... |
| coromonadalix:
The lc102 need a few parts for calibrating it myself I have a hard time to find 0.25% precision caps and some coils values in Canada You need: caps 1500pf 1.2uf 500uf coils 20uh 80uh 800uh 8mh 60mh 80mh 800mh 2 henry 8 henry res not wire wounded type not too difficult to find 1 ohm 15 ohms 20 ohms 150 ohms 250 ohms 1,5K ohms 50k ohms |
| mr.fabe:
--- Quote from: mr.fabe on August 06, 2019, 07:43:41 pm ---Here's a pic of the battery and clip.. I think I paid around $24 USD for the battery and $5 for the clip. (Attachment Link) --- End quote --- Sorry about the delay on the battery clip information... The battery clip I purchased was from DigiKey. https://www.digikey.com/product-detail/en/mpd-memory-protection-devices/ZA5350-B/ZA5350-B-ND/124921 |
| Navigation |
| Message Index |
| Next page |
| Previous page |